Help with RGB mod for Intec lcd Psone

wendyl15 · Post by **wendyl15** » Thu Sep 11, 2008 3:32 pm

All,

I have an Intec lcd screen 4" for the Psone. This one has a tray that the Psone sits in and the power for the lcd comes from the Psone adpater. I would like if possible to mod it for RGB for arcade pcb testing. Anyone know if this is possible? I have taken it apart and it has a Sharp lcd screen and the a/v signals go straight into the pcb that connects to the lcd. Anyone know where I could find pinout or a mod instruction for this that would be great. Thank You!

tom61 · Post by **tom61** » Thu Sep 11, 2008 6:25 pm

I had the 4" and it is not possible to do an RGB mod to it. The chips convert only composite video to the digital signal the TFT uses.

64M320N3 · Post by **64M320N3** » Sat Sep 13, 2008 11:15 am

Ya there is no RGB pinout. Sorry.

You could try a RGB to composite mod, but i'm pretty sure it would involve encoding and it's more of a pain in the butt that it's worth.

You could try to find a converter online somewhere but i'm not sure if they even exist.
In other words, get a screen that accepts RGB, like the 5" psone screen, becaue the PSONE SCREEN ROCKS!!!