My N64P Shopping List

[Zereo_XI]

I want to start my N64P but with everything I need. So I would like your help to complete my list of stuff I need:

Essential:
-Soldering Iron
-Solder
-Desoldering Iron/Pump/Braid
-Dremel with different Edges
-Sander

N64:
-N64
-N64 Controller
-Expansion Pack
-PS1/Zenith Screen

Screed Led Mod:
-Three 3-mm T1 white LEDs (www.digikey.com, part #CMD204UWC-ND)
-One 10-ohm resistor (Radio Shack catalog #271-1101)

Screen Anti-Glare Mod:
-Scott Towel
-Water
-Razor Blade

Cooling:
-HeatSinks (Like Bacteria's : http://forums.benheck.com/viewtopic.php?t=19432)
-Small PC Fan or Other

Powering:
-9V or Lower Battery with Charger
-100uf electrolytic capacitor
-TI PTH08000
-2k ohm resistor

Case:
-ZN-45 (http://www.polycase.com/item/zn-45.html)
-Bondo

--EDIT--
I will update this post with new Info & Updates on my Progress.
Green = Have, Red = don't

[Mario]

I have LEDs and a 10-ohm 1w resistor, what will you pay/trade? Do you have NES games?

If you like, I'll give you 4 LEDs, (In case you mess up one) and I can diffuse them for you.

(BTW, shouldn't this be in Trading Post?)

[collinE]

no he doesn't want us to give him the stuff, he just wants to complete his list.

err... right?

you'll need the stuff from Harshboy's Diagram Sticky to take the voltage down to 3.3v...

100uf electrolytic capacitor
TI PTH08000
2k ohm resistor

and if you're going as far as putting a soldering iron on the list, then maybe a little container of tip tinner and cleaner. (i can't solder without it)

depending on whether you've decided to include a memory pack or rumble pack, you'll need one of those. or not, if you make it external.

can't think of anything else at the moment

[Zereo_XI]

Thanks collinE for the info. If anyone sees something missing please tell me.

[Mario]

Do you need LEDs? I can give you some.