Battery pack for GameCube

adramund · Post by **adramund** » Thu Apr 17, 2008 6:19 am

Hello,

I wanted to know what would be the battery performance for the GameCube Portable, Thanks.

PS: Sorry for my English, but I am french ^^

khaag · Post by **khaag** » Thu Apr 17, 2008 1:57 pm

Umm, that would depend on the capacity (in mAH [milli Amp Hours]).

As for power requirements, I'm pretty sure the GC runs on 12-14.4V. Give us some specs for your batteries and we can help you more.

adramund · Post by **adramund** » Fri Apr 18, 2008 6:20 am

The cord indicates 12V and 3.25A. In france on the 220/230v does. I have to take a battery that has values below?

adramund · Post by **adramund** » Tue Apr 22, 2008 3:59 pm

This battery is it good for a GCP?
http://radiospares-fr.rs-online.com/web ... &R=6152444

It has been approximately how many hours of autonomy?

khaag · Post by **khaag** » Tue Apr 22, 2008 7:15 pm

adramund wrote:This battery is it good for a GCP?
http://radiospares-fr.rs-online.com/web ... &R=6152444

It has been approximately how many hours of autonomy?

If you have to ask if that battery will work for a GCp, I think it's truly out of your league. No that battery alone won't power it. You would need about 4 wired in series to have enough voltage; and even then its only 2600 mAH which will give you less than three quarters of an hour of battery life.

adramund · Post by **adramund** » Wed Apr 23, 2008 2:16 am

I must therefore take two battery and mounted a series? (I do studies in electriciter therefore for the wiring there will be no problem)

adramund · Post by **adramund** » Thu Apr 24, 2008 1:46 pm

I wanted to know if it was well batteries for a GCP.

http://www.pilesbatteries.com/produit-3 ... 00mAh.html
http://www.pilesbatteries.com/produit-3 ... 00mAh.html
http://www.pilesbatteries.com/produit-3 ... 00mAh.html

I also wanted to know the approximate autonomy batteries. Thank you.

Bigmac · Post by **Bigmac** » Thu Apr 24, 2008 3:21 pm

None of those will work. It has to have 12V.

khaag · Post by **khaag** » Thu Apr 24, 2008 11:28 pm

I suggest you pay closer attention in electronics class.

adramund · Post by **adramund** » Fri Apr 25, 2008 5:24 am

I am studying electricity in the building, is slightly different. If I ask you questions on the battery because this is my first mod, I am still a novice in this field.^^
In fact my problem with batteries is that my transformer GameCube is a 12V. And I saw that the transformer of a PSP was a 5V and the battery was a 3.6 V. That is why I feel that I need a voltage less than that indicated on the transformer. But if I have a 12V, I would take a 12V, there are no worries.