how do I start this mod?

LoyalistRevolt · Post by **LoyalistRevolt** » Tue Aug 21, 2007 2:47 pm

Ok I want to mod my VMU I would like to install a blue led on the top that glows when it is plugged in!

underclocked · Post by **underclocked** » Tue Aug 21, 2007 3:10 pm

Find out which pin does what. Then when you find the pins with power you solder a led to them.

dudex77 · Post by **dudex77** » Tue Aug 21, 2007 3:29 pm

Here ya go
http://devcast.dcemulation.com/mods/vmuled/vmu.php

LoyalistRevolt · Post by **LoyalistRevolt** » Fri Aug 24, 2007 10:48 am

dudex77 wrote:Here ya go
http://devcast.dcemulation.com/mods/vmuled/vmu.php

thanks but what sized LED do I get also what type of wires?Also Where do I get the Resistor and what type?

underclocked · Post by **underclocked** » Fri Aug 24, 2007 10:53 am

It really just depends on what size of led you can find that runs on about 3 volts.

You will need a 47ohm resistor. Just get some stranded wire, something thin.
You should be able to find what you need at your local radio shack.