Stock Snes having audio and lock up problems

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
Silent Shadow
Posts: 17
Joined: Fri Apr 13, 2007 2:34 pm
Location: MA, USA
Contact:

Stock Snes having audio and lock up problems

Post by Silent Shadow »

(Updated post with better info.)

I recently picked up a free Snes that I thought I'd play around with. Unfortunately while play testing it I discovered why it was free - the audio isn't working properly and some games freeze up (at the same point in the game every time).

Here's the data:
- Original large model SNS-001
- No separate cool sound module
- No obvious internal or external damage
- I don't think it's every been opened
- I think I've cleaned the AV parts throughly

I've tested both an RF and an AV cable and both yield the same results:
- Some games play ok except the background music is slightly distorted
- Some games play ok but the background music is extremely distorted
- The audio will totally cut out on some games
- Some games freeze up(at the exact same point every time)

Could this just be a dirty pin connector? (what should I use to clean that?) Any ideas on what I should look at?

Thanks for any info!
Last edited by Silent Shadow on Sun May 06, 2007 6:39 pm, edited 2 times in total.
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

Clean it. Get some rubbing alcohol and scrub all the connections on the A/V and the sound chip and the likes.
Hey, sup?
Kenny_McCormic
Posts: 223
Joined: Tue Mar 28, 2006 4:53 pm

Post by Kenny_McCormic »

dirty games/cart connector
Silent Shadow
Posts: 17
Joined: Fri Apr 13, 2007 2:34 pm
Location: MA, USA
Contact:

Post by Silent Shadow »

What's the best way to clean the connector? I'd rather the diy version instead of buying the actual snes cleaning kit.
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

Rubbing Alcohol and something stiff that will fit inside the cartridge slot. Or if you have some fine grit sandpaper (600+) use the GENTLY for the cartridge.
Hey, sup?
Post Reply