NES COmputer COntroller

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator: Moderators

Post Reply
Jongamer
Senior Member
Posts: 2151
Joined: Wed Dec 13, 2006 2:43 pm
PSN Username: Geekystig790
360 GamerTag: Mesu Gitsune
Location: Fairborn, Ohio

NES COmputer COntroller

Post by Jongamer »

well online I found a guide how to attach the NES controller to the Printer port, Well First I tried useing the Diodes, nope didnt work, So I removed the Diodes and put in USB cord and used that to leech power off the USB port, nope still nothing, then lastly I attached a Battery Pack rated for 6v Slightly higher than what Is needed for the NES controller, and yet still no luck, I even too a battery out of the battery holder to see if it was overpowered and still nothing.

I'm starting to get real pissed off.
ATOMICMAN
Posts: 467
Joined: Thu Nov 09, 2006 10:45 am

Post by ATOMICMAN »

theres a usb guide so you dont have to do the printer port.
schmellyfart
Portablizer Extraordinaire
Posts: 1151
Joined: Sun Mar 05, 2006 8:29 pm
Steam ID: schmellyfart
Location: Gilbert, AZ

Post by schmellyfart »

Are you sure you have it wired correctly?

I wired up a SNES controller with diodes and it didn't work the first time so I went back and double checked the connections and one of the wires got disconnected somehow.
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

Sorry I cant help, but is there a way to wire a gc or xbox1 to usb?

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

Shhh! I'm not officially back yet.
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

Broken links pwn

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
ghosstt
Senior Member
Posts: 1551
Joined: Mon Feb 26, 2007 4:14 pm

Post by ghosstt »

schmellyfart wrote:Are you sure you have it wired correctly?

I wired up a SNES controller with diodes and it didn't work the first time so I went back and double checked the connections and one of the wires got disconnected somehow.
do you have a like or something on how to do a snes/usb controller?
vb_master
Moderator
Posts: 4793
Joined: Tue Jun 08, 2004 9:52 pm

Post by vb_master »

ShockSlayer wrote:Sorry I cant help, but is there a way to wire a gc or xbox1 to usb?

SS
Basically take all the XBox wires except the yellow one and solder them to the USB connector, then install XBCD drivers and you're done.
schmellyfart
Portablizer Extraordinaire
Posts: 1151
Joined: Sun Mar 05, 2006 8:29 pm
Steam ID: schmellyfart
Location: Gilbert, AZ

Post by schmellyfart »

ghosstt wrote:
schmellyfart wrote:Are you sure you have it wired correctly?

I wired up a SNES controller with diodes and it didn't work the first time so I went back and double checked the connections and one of the wires got disconnected somehow.
do you have a like or something on how to do a snes/usb controller?
I dont know how to do a SNES/USB. But theres a website that sells the chip that you have to use for the SNES/USB. http://www.retrousb.com/kits.html

Personally, (the cheapo that I am) I'd save the 17 bucks and go with the parallel one. :D

Oh, Jongamer, did you have the diodes in the right way?
ATOMICMAN
Posts: 467
Joined: Thu Nov 09, 2006 10:45 am

Post by ATOMICMAN »

ATOMICMAN wrote:theres a usb guide so you dont have to do the printer port.
http://www.joystiq.com/2004/09/07/how-t ... -joystick/

there you go.
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

vb_master wrote:
ShockSlayer wrote:Sorry I cant help, but is there a way to wire a gc or xbox1 to usb?

SS
Basically take all the XBox wires except the yellow one and solder them to the USB connector, then install XBCD drivers and you're done.
Link to XBCD Drivers?

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
ghosstt
Senior Member
Posts: 1551
Joined: Mon Feb 26, 2007 4:14 pm

Post by ghosstt »

ShockSlayer wrote:
vb_master wrote:
ShockSlayer wrote:Sorry I cant help, but is there a way to wire a gc or xbox1 to usb?

SS
Basically take all the XBox wires except the yellow one and solder them to the USB connector, then install XBCD drivers and you're done.
Link to XBCD Drivers?

SS
http://www.redcl0ud.com/xbcd.html
Jongamer
Senior Member
Posts: 2151
Joined: Wed Dec 13, 2006 2:43 pm
PSN Username: Geekystig790
360 GamerTag: Mesu Gitsune
Location: Fairborn, Ohio

Post by Jongamer »

just google XBCD, youll find it easy.

and I already Succefully made 2 Xbox USB controller adaptors that work perfectly, is there a way I could possible take a USB IC out of something and attach it to the NES controller and wire it for USB? And just DL the NES USB Driver? I'll try the Diodes again, but yet I will have to go buy more because I threw em away cuz I got pissed.
Post Reply