confirm of my snes controller scematic

Master of Portables · Post by **Master of Portables** » Tue Feb 06, 2007 7:20 pm

as i was about to wire the controller, i looked at ben's book scematic, and it wasn't all that specific, i want to confirm the scematic i have summed up, i know i have to connect the ic and put power through it, but this is for the button pins

shmagoogin77 · Post by **shmagoogin77** » Wed Feb 07, 2007 5:13 pm

http://img204.imageshack.us/my.php?imag ... led7hn.png
that is posted by turbotax and its the snes ic

Master of Portables · Post by **Master of Portables** » Wed Feb 07, 2007 9:37 pm

ok, if you paid attention to my above post at allllllllllllllll, i am using 2 nes ic's that post wasn't a huge help

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed Feb 07, 2007 9:44 pm

check out gamesx.com i think they have what you want, and i think you need 4.7k resistors on each button for them to work. the snes ic is easier in my opinion

Website · Post by **Life of Brian** » Thu Feb 08, 2007 1:39 am

Yup, just connect the buttons to the SNES IC and bam, you're done. Don't even bother with the two NES IC's - I tried long and hard and never got it quite right (I mean hours of effort over several attempts). Tried it once with the SNES IC and no prob at all. Works every time. Of course, you gotta squint to see the tiny leads but it's alright...

shmagoogin77 · Post by **shmagoogin77** » Mon Feb 12, 2007 5:57 pm

Master of Portables wrote:ok, if you paid attention to my above post at allllllllllllllll, i am using 2 nes ic's that post wasn't a huge help

first off you cant really tell and listen to joedog