psone screen viseo cable

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
mycoplasma
Posts: 35
Joined: Fri Jan 07, 2005 1:58 pm
Location: Washington D.C.

psone screen viseo cable

Post by mycoplasma »

does the psone screen accept the little yellow video cable? thanks in advance.
Geebs61
Posts: 234
Joined: Wed Jun 09, 2004 7:42 pm
Location: Salem, Oregon
Contact:

Post by Geebs61 »

youre gonna need to be a little bit more specific than that.
"Being a teenager is to experience a renaissance of the body, mind and spirit. It is to experience life at it’s fullest." - Cliff Eiffler
SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

I think he means the composite yellow plug. Yes, it does, but you need a cord from radioshack. This one is higher end, but you should be able to find one a bit cheper.

http://www.radioshack.com/product.asp?c ... id=16-3686
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
mycoplasma
Posts: 35
Joined: Fri Jan 07, 2005 1:58 pm
Location: Washington D.C.

Post by mycoplasma »

well, i'm thinking about doing that portable sega genesis made from the radica sega genesis, and i was thinking about using the ps1 lcd if i decide to make the genesis. i know that the radica genesis has composite video on it. i was thinking i could run a composite video cable from the radica genesis to the ps1 screen, so i was wondering if the ps1 screen accepts composite.
Sparkfist
Forum Administrator
Posts: 6754
Joined: Tue Apr 20, 2004 7:12 am
Location: Michigan

Post by Sparkfist »

Yes the PSOne screen accepts composite. But you dont need to buy something like what Spongbuell showed, unless you plan to keep in in one piece and in the original case. If you are not then you just use the pinout of the board and solder wires to the connections.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too

I am a geek.
Post Reply