Nincade-

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator: Moderators

Post Reply
typamc95
Senior Member
Posts: 784
Joined: Fri Jun 30, 2006 9:46 pm
Location: The bun is in your mind.

Nincade-

Post by typamc95 »

I had a Idea for a Nes arcade tabletop that hade a real nes,5 cartidge connectors,and a coin slot.
Could I set up a timer that went off when 10 minutes past and give the option to close or continue (for a Quarter).
Should I use a advantage (easy) or make a custom controller(no cheepy turbo)?
Can I set it up so that the cartrige slot can be selected through a button and make the wires read that port?
Should I use a old tv(Cheep) or buy a Arcade monitor(Quality)?
How would I make start up with *Insert Coin*?
Image
Skyone wrote:
typamc95 wrote:There called Roto-disc.
http://www.mariowiki.com/Roto-Disc
Game, set, match!
Triton
Moderator
Posts: 7398
Joined: Mon May 24, 2004 12:33 pm
360 GamerTag: triton199
Steam ID: triton199
Location: Iowa
Contact:

Post by Triton »

so basically a DIY playchoice 10?
typamc95
Senior Member
Posts: 784
Joined: Fri Jun 30, 2006 9:46 pm
Location: The bun is in your mind.

Post by typamc95 »

Eh more or less,but it will have ports on the side for special games, I could also work in a arkanoid paddle on the top of the controller.

Note:I plan on selling it to the local pizza parlor.
Image
Skyone wrote:
typamc95 wrote:There called Roto-disc.
http://www.mariowiki.com/Roto-Disc
Game, set, match!
typamc95
Senior Member
Posts: 784
Joined: Fri Jun 30, 2006 9:46 pm
Location: The bun is in your mind.

Post by typamc95 »

Bumpenstien!
Come on I need some help!
Where could I get Wood?
Image
Skyone wrote:
typamc95 wrote:There called Roto-disc.
http://www.mariowiki.com/Roto-Disc
Game, set, match!
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Post by vskid »

typamc95 wrote:Where could I get Wood?
Do you need someone to tell you when to breathe too?
Home Depot or any other home improvement store, or a scrap yard if you want cheap.
Image
typamc95
Senior Member
Posts: 784
Joined: Fri Jun 30, 2006 9:46 pm
Location: The bun is in your mind.

Post by typamc95 »

Yes.I ment cheep.
But I need to know the other questions first.
Image
Skyone wrote:
typamc95 wrote:There called Roto-disc.
http://www.mariowiki.com/Roto-Disc
Game, set, match!
bicostp
Moderator
Posts: 10491
Joined: Mon Mar 07, 2005 5:47 pm
Steam ID: bicostp
Location: Spamalot
Contact:

Post by bicostp »

typamc95 wrote:Where could I get Wood?
<img src="http://www.skytroniks.com/images/databa ... es/wtf.gif">

Duh.

Home Depot
Lowe's

If you want cheap, go look for used palletes, pull out all the nails and staples, and you have some cheap, crappy boards to play with.

From the sound of what you want to do, you would need a lot more skills in programming than you seem to have. And do you honestly think any company would buy a homemade arcade machine which contains a 20+ year old video game console and was built by hand with secondhand lumber?

Sorry to burst your bubble but your plan is very far-fetched, and well... put bluntly it's downright silly.
typamc95
Senior Member
Posts: 784
Joined: Fri Jun 30, 2006 9:46 pm
Location: The bun is in your mind.

Post by typamc95 »

Its just a pizza parlor,not pizza hut!
Image
Skyone wrote:
typamc95 wrote:There called Roto-disc.
http://www.mariowiki.com/Roto-Disc
Game, set, match!
bicostp
Moderator
Posts: 10491
Joined: Mon Mar 07, 2005 5:47 pm
Steam ID: bicostp
Location: Spamalot
Contact:

Post by bicostp »

That doesn't make a difference. No sane buisness would spend money on a homebuilt machine which runs on 20+ year old technology that was made by some random kid. Why? Because if it looke cheap, and runs old home games, nobody will want to play it. I don't think anyone would buy it.

Not to mention your ambitious goals of an onscreen "insert more money" prompt, a homemade cartridge switching device, and an electronic timer. Some of these features are a lot harder to do than others (the onscreen prompt being the hardest).

My question is why/ Why do you want to do this? Have you even talked to the store's manager?

Honestly you'd be better off fixing up an old Pac Man machine for them.
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Post by gannon »

If you really wanted a NES Arcade, get a Player's Choice 10. You might even be able to make a custom adapter board so you can use NES carts on it, kinda doubtful though.
tom61
Senior Member
Posts: 1517
Joined: Fri Mar 25, 2005 6:51 pm

Post by tom61 »

Also, just to continue to rain on your parade, the games you have for your home system are not licensed to be put on public display nor have money charged for its play, which would make you and/or the parlor potentially liable for damages. Also, some munipalities have stricter policies on machines that can be put out for public use.
csurban
Portablizer
Posts: 145
Joined: Sat Mar 25, 2006 11:10 pm
Location: The Sonoran Desert

Post by csurban »

Even IF you could do all of this, (sounds a little over ambitious for a beginner) why not put a newer, cheaper console in there which regular people might consider playing like an N64.
nope... can't think of anything I could possibly want to put in my Signature Block...
Nucklez
Posts: 118
Joined: Tue Sep 26, 2006 2:50 pm
Location: US
Contact:

Post by Nucklez »

I would be VERY weary about the license on those. The only real legal way I would see around it would be to get an original arcade cabinet that still works. The chances of you getting caught would be slim, but I definitely would never do it. I have made my own arcade cabinet from wood that I got from Lowes and a computer with MAME, but I would never consider putting it in a public business, or reselling it.
Image
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

typamc95 wrote:Where could I get Wood?
:shock: Late night TV :shock:

A tree.
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
Post Reply