PSOne Screen broken?
Moderator: Moderators
PSOne Screen broken?
I inputed 13 volts into my screen by accident and it turned on for a second, turned off, and now it wont turn on at all. did i blow a fuse or compleatally mess up the screen?
nope... can't think of anything I could possibly want to put in my Signature Block...
-
Vladakabrent
- Posts: 17
- Joined: Tue Apr 11, 2006 11:28 pm
....
Well, lets hope it's fixible. (sp?). I'm guessing that when you plug in the power (from the wall) that it doesn't seem to respond at all correct?
If so look for a fuse on the front of the PSone Screen that is below the screen itself but above the pins (just right of the left speaker). It's labeled Ps1. Give it some juice, and what I did was get a really small wire and "bypass" it that way. If you get even just a flicker, then you know that it's a blown fuse.
After that I just placed a very small amount of solder over it and it worked just like new. If I can find the link I will show you a pic. Let us know if that works.
Edit: Here is the picture
If so look for a fuse on the front of the PSone Screen that is below the screen itself but above the pins (just right of the left speaker). It's labeled Ps1. Give it some juice, and what I did was get a really small wire and "bypass" it that way. If you get even just a flicker, then you know that it's a blown fuse.
After that I just placed a very small amount of solder over it and it worked just like new. If I can find the link I will show you a pic. Let us know if that works.
Edit: Here is the picture