Probably easy PSone LCD question

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
spreeway
Posts: 16
Joined: Wed Mar 08, 2006 12:47 am

Probably easy PSone LCD question

Post by spreeway »

So I'm trying to composite video from my nes noac to the psone lcd. I did the input composite shown here.
http://www.benheck.com/phpBB/viewtopic.php?t=2278
And then connected it on the composite to the noac.

My question is, is there any more ground wires or other wires that I have to connect in order for the lcd to display?
Top
doctorjames
Posts: 129
Joined: Tue Sep 27, 2005 8:55 pm
Location: El Paso

Post by doctorjames »

As long as you have all of the grounds taken care of Slot 1: Pins 2 and 7, and Slot 2: Pins 4 and 8, you should be good.
EDIT: Also, if you are going to make it portable, make sure you have 7.5v going to Slot 1: Pin 1, and 5v from a 7805 going to Slot 1: Pin 12.
Top
Post Reply

Return to “Portable Screen Hacking”