Due to budget restraints, my NESp has to use ni-cd batteries. The system has in it a Yobo US game console, A PSOne LCD screen w/LED mod, and a Yobo controller (the one that comes w/the system. How many RadioShack Ni-Cd AA batteries (1.2 volts, 1000mAh) would I need to run the unit, and how much play time would I get?
Here's the batteries: http://www.radioshack.com/product/index ... age=search
Batt question
Moderator: Moderators
-
CronoTriggerfan
- Moderator
- Posts: 4131
- Joined: Fri Jan 27, 2006 3:07 pm
- Location: University of Michigan - Ann Arbor
- Contact:
PSone screen (LEDed) - 350
NES clone - 150 (this is a guess)
----------
Total - 600 mA
Facture in that you need 7.2v, so that's 6 batteries in series. You will be able to get about an hour an a half. That is if the NES clone doesn't consume more then 150mA an hour, if it is less however you'll have more play time.
Good luck.
P.S. For future knowledge, post battery related question in the forum for which the project fits, a.k.a in the NES forum for this one.
NES clone - 150 (this is a guess)
----------
Total - 600 mA
Facture in that you need 7.2v, so that's 6 batteries in series. You will be able to get about an hour an a half. That is if the NES clone doesn't consume more then 150mA an hour, if it is less however you'll have more play time.
Good luck.
P.S. For future knowledge, post battery related question in the forum for which the project fits, a.k.a in the NES forum for this one.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too
I am a geek.