Portable-Palooza (voting thread opened!)
Moderator: Moderators
-
lovablechevy
- Portablizer Extraordinaire
- Posts: 1104
- Joined: Wed Nov 01, 2006 3:09 pm
- Location: busy with a project
- Contact:
shoot... everything is going wrong for me! talk about frustrating!

they call me the Queen of Bondo, though maybe i should be called the Queen of Epoxy Putty

current project - code name: blue mushroom!
current project - code name: blue mushroom!
-
bacteria
- Portablizer Extraordinaire
- Posts: 3984
- Joined: Fri Apr 20, 2007 12:14 am
- Location: Hampshire, UK
- Contact:
Well done Life of Brian.
My NDS cells sucked, same thing happened again.
Change of tack - getting the smaller versions of the Li-ions I used in my mullti-platform project, these ones are 20mm high (half height), 7.2v, 99g and 1850mAh. Just bought two, arriving Wednesday's post. Uses same charger as my existing ones which is handy. Leaves it rather close to compo end time!!
Spent half of today getting the audio to work. Turned out I had some wires in my female cart the wrong way around so one of the audio leads connected to the ground so I didn't get any sound. Resolved now!
I will be pushed to complete the project in time but will do my best. Had a few setbacks which cost lots of time.
My NDS cells sucked, same thing happened again.
Change of tack - getting the smaller versions of the Li-ions I used in my mullti-platform project, these ones are 20mm high (half height), 7.2v, 99g and 1850mAh. Just bought two, arriving Wednesday's post. Uses same charger as my existing ones which is handy. Leaves it rather close to compo end time!!
Spent half of today getting the audio to work. Turned out I had some wires in my female cart the wrong way around so one of the audio leads connected to the ground so I didn't get any sound. Resolved now!
I will be pushed to complete the project in time but will do my best. Had a few setbacks which cost lots of time.
-
Rekarp
- Portablizer Extraordinaire
- Posts: 2163
- Joined: Thu Dec 28, 2006 1:52 am
- PSN Username: Lnghrn_
- Steam ID: rekarp
- Location: Austin, Tx
- Contact:
Case is about done. I still need to cut the front parts out and glue it together but all the resawing and other cuts are done. Electronics are doing good. The Retro Duo is completely hacked up and ready to be stuck in the case. Didn't finish the controllers or the power circuit yet but I can knock those out in a day so I am not to worried about those.
From the way its been progressing I say I might have it done on Sunday so I will have a little time to do something extra
From the way its been progressing I say I might have it done on Sunday so I will have a little time to do something extra
-
Rekarp
- Portablizer Extraordinaire
- Posts: 2163
- Joined: Thu Dec 28, 2006 1:52 am
- PSN Username: Lnghrn_
- Steam ID: rekarp
- Location: Austin, Tx
- Contact:
Not going to let this thread slip down
Another update. Case almost done. Probably another 4-6 hours left on it to make it perfect.
http://www.longhornengineer.com/Project ... 1#daythree

Another update. Case almost done. Probably another 4-6 hours left on it to make it perfect.
http://www.longhornengineer.com/Project ... 1#daythree

-
bacteria
- Portablizer Extraordinaire
- Posts: 3984
- Joined: Fri Apr 20, 2007 12:14 am
- Location: Hampshire, UK
- Contact:
kasar - you entered your GameCube portable, although you started it 11 July. Not eligible!
In regards to my project, going some design changes, look of rear will be a bit different; going to mount two of the Li-ion cells in the case itself when they arrive (all will be clearer when done). I only have Tuesday > Friday for project time and in that time I need to make a dual battery compartment, recess it in the casing, make some game carts (may only have time for two or three in the time constraints, case sides, some building work and some painting. Ouch - tight is not the word!!
In regards to my project, going some design changes, look of rear will be a bit different; going to mount two of the Li-ion cells in the case itself when they arrive (all will be clearer when done). I only have Tuesday > Friday for project time and in that time I need to make a dual battery compartment, recess it in the casing, make some game carts (may only have time for two or three in the time constraints, case sides, some building work and some painting. Ouch - tight is not the word!!
-
lovablechevy
- Portablizer Extraordinaire
- Posts: 1104
- Joined: Wed Nov 01, 2006 3:09 pm
- Location: busy with a project
- Contact:
he actually started it june 11th...
they call me the Queen of Bondo, though maybe i should be called the Queen of Epoxy Putty

current project - code name: blue mushroom!
current project - code name: blue mushroom!
Re: Portable-Palooza (submission thread opened!)
Looks to me like that part of the rules was more of a guideline.Skyone in the rules wrote:6) Portables will be encouraged to be STARTED on the day of commencement of the contest, so the time limit will be forced onto everyone. Go ahead and cheat though, whatever.
I personally think it is fine for him to submit it, but I'm also not in the competition, so my opinion doesn't count for much.
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies
-
Dark-Aries
- Posts: 291
- Joined: Fri Nov 09, 2007 7:12 pm
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies
-
mothatrucka
- Banned
- Posts: 588
- Joined: Sun May 04, 2008 12:21 pm





