PSone VGA Mod Can someone help?

Krypto · Post by **Krypto** » Sat Oct 29, 2005 12:50 pm

Ok, I recently purchased a PSone screen for cheap, went and bought a vga cable.

The wires from the vga cable are:

BIG:
Red
Blue
Green

SMALL:
White
Black
Orange
Brown

Can someone help me with a schematic to solder them to the psone board? I tried the schematic on bit-tech, but the wire colors don't match and I don't want to screw anything up.

Help would be appreciated! Thank you!

nos_slived · Post by **nos_slived** » Sat Oct 29, 2005 5:45 pm

I'm guessing that you want to connect the PSone screen to your computer. It's a bit more complicated than just plugging it into your computer. Use the search, this has been discussed before.

xriverfalconx · Post by **xriverfalconx** » Sat Oct 29, 2005 8:31 pm

I used the schematics from bit-tech and everything worked perfectly fine on my psone. Check that you soldered the stuff to the CORRECT locations on the vga cable and onto the psone controller. Secondly, use the offical psone adapter or OFFICIAL psone car adapter in order to get power to it. Lastly...mess with the settings using powerstrip and another video card.

Krypto · Post by **Krypto** » Sat Oct 29, 2005 8:34 pm

Will do, may I ask what video card you are using with it?