opening the screen

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
kade
Posts: 381
Joined: Mon Aug 22, 2005 3:55 pm

opening the screen

Post by kade »

i know that this sounds stupid but i cant get the psone screen open. i can but i dont want to break it. can you open it and not break it, because i only have one chance at doing this cause i have no maney to continue if i screw up.
atkafighter
Posts: 469
Joined: Sat Jun 18, 2005 9:16 pm

Post by atkafighter »

Did you check all the screw locations? Theres two in each speaker, one under each rubber pad, and three in the hinge assembly. You have to unsnap the parts to open it.
http://www.geocities.com/atkafighter/screen.html
I have a guide on my site. It states pretty much the same thing I just mentioned.
Hope this helps
daguuy
Portablizer
Posts: 3666
Joined: Fri Apr 01, 2005 7:09 pm
Location: missoura

Post by daguuy »

ImageImage
kade
Posts: 381
Joined: Mon Aug 22, 2005 3:55 pm

Post by kade »

i mean before i take off the cover.
kade
Posts: 381
Joined: Mon Aug 22, 2005 3:55 pm

Post by kade »

ok i get it now. i got most of it off but the speaker part is stuck and is chipping off. but not comming off.
Post Reply