INTEC 5.4 lcd help

jjcarron · Post by **jjcarron** » Sat Oct 08, 2005 6:25 am

hey, im just starting out on my portable building, and saw this lcd goin pretty cheap, so i thought i would pick it up, i was wondering if anyone would have a guide to hacking it, or if it would be the same as the PSone screen in the book?? and any other info i could get on this screen.
thanx

jj

Post by **marshallh** » Sat Oct 08, 2005 8:06 am

Is it a gamecube screen? If so it probably runs on 12v. Electronically, it's probably much different than the psone screen, but you can still hack it with leds and such.

daguuy · Post by **daguuy** » Sat Oct 08, 2005 12:34 pm

if you need to find out the AV/power pinout, just trace the wires from the plug and see where they go

atkafighter · Post by **atkafighter** » Sat Oct 08, 2005 1:00 pm

Is that the one that clips onto the PS2? I have one and the backlight burnt out. I'll start poking into it sometime.

jjcarron · Post by **jjcarron** » Sun Oct 09, 2005 5:48 am

ya it is a game cube one, and thanx for the help

demonofaj · Post by **demonofaj** » Sun Oct 09, 2005 1:47 pm

FYI, to get 12 volts, just wire 8 AA's in series. And I got a Q myself, are the Radio Shack battery holders, those enlosed ones in series form or in parallel form

daguuy · Post by **daguuy** » Sun Oct 09, 2005 1:51 pm

10 AAS if you use rechargables

demonofaj · Post by **demonofaj** » Sun Oct 09, 2005 2:02 pm

Yes, Yes indeed

Post by **Triton** » Sun Oct 09, 2005 5:25 pm

the radioshack batt boxes are sieries