Panasonic TR-6LC1 Screen
Moderator: Moderators
Panasonic TR-6LC1 Screen
Hi there, I can get ahold of two screens one being this panasonic TR-6LC1. The screens are from some jap car imports used for GPRS. The thing is they only have S-Video input could I use these screens or not? thanks. (the other screen is a Sharp TFT Crystaltron 4.5" same input)
this is an obvious answer... If your device has s-video out, you can use it. the main thing you should worry about is what the screen needs power wise..
Im sure its useable somehow.
Im sure its useable somehow.
www.bsodtv.org - Hacking is NOT a crime!
Sorry for the necro, but I was on holiday, The input plug into has 13 pins, 3 rows of 4 and 1 on the bottom of the rows. I can't find the pinout anywhere for it. It is the only plug that can be plugged into it and there are no switches on it. There are two dials for colour and tint plus a sensor. Any easy way to find the pinouts?
-
Metroid fan
- Senior Member
- Posts: 2158
- Joined: Fri Apr 15, 2005 2:36 pm
- Location: Somewhere in the universe
- Contact:
Thing is it has no switches only a sensor, the power would run through the 13 pin plug, which I don't know which pin it is so I can't test it out.
I'm thinking the worst here with it having a sensor, it may need to be turned on with a remote.
Is there anyway to kinda like bypass the sensor if need be?
Does anyone know about these 13 pin plugs, theres an input plug the same on the back of my head unit.
And another thing, should I even bother with this screen?
I'm thinking the worst here with it having a sensor, it may need to be turned on with a remote.
Is there anyway to kinda like bypass the sensor if need be?
Does anyone know about these 13 pin plugs, theres an input plug the same on the back of my head unit.
And another thing, should I even bother with this screen?


