Question About a NES Clone

electromaster64 · Post by **electromaster64** » Mon Sep 05, 2005 8:51 pm

Does anyone have pics of the inside of this system? If it plays US games with no need to solder a new cart adaptor then that is a big help even if the main board is a little bigger than the Super Joy.

http://cgi.ebay.com/Nintendo-Game-Conso ... dZViewItem

Post by **gannon** » Mon Sep 05, 2005 9:05 pm

If you want I can take a pic of the insides of mine in a few days. It's nice, but the video output is too strong for my last hipscreen.

electromaster64 · Post by **electromaster64** » Tue Sep 06, 2005 7:22 am

How was the video output too strong for the Hip Gear screen?

Post by **gannon** » Tue Sep 06, 2005 1:47 pm

it was too strong so the picture was distorted.

electromaster64 · Post by **electromaster64** » Tue Sep 06, 2005 7:25 pm

So is there any way to put a resistor or something in there to make it work?

Tendoman · Post by **Tendoman** » Wed Sep 07, 2005 5:10 pm

I don't know if this would help but I made one myself out of this system and didn't have a problem, aside from my lack of knowlege about decreasing power consumption.

http://benheck.com/phpBB/viewtopic.php?t=3642

electromaster64 · Post by **electromaster64** » Wed Sep 07, 2005 6:21 pm

What are the dimensions of the systems case? And did you finally get all the bugs worked out? Do you have any pics of your NESp? What were the 3 different boards for?

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed Sep 07, 2005 6:22 pm

im guessing one has the casrt slot and NOAC on it the other has power and vid and audio and the other is the control board but you can probly get rid of the 2 without the cart slot

Tendoman · Post by **Tendoman** » Wed Sep 07, 2005 7:18 pm

May or may not work depending on how many people check it out. Here's some pics of the guts and running. Hope it helps.

Oh yeah the previous post was right about the 3 sections.

Post by **Triton** » Wed Sep 07, 2005 7:29 pm

AHHHHH my bandwidth... it burns!

lol jk, try sizin em down a bit next time

Post by **bicostp** » Wed Sep 07, 2005 7:50 pm

Imageshack 'em!

And put them in this code:

Code: Select all

<img src="http://www.geocities.com/electron_studios/DCP00702.JPG" width=450>

But change the URL to the image's URL. Leave the quotes, or it won't work.

Or just size them down with Paint.

electromaster64 · Post by **electromaster64** » Thu Sep 08, 2005 11:11 am

Tendoman do you have a pinout for the board with the cartridge connector? And do you know the dimensions of the board?

Tendoman · Post by **Tendoman** » Thu Sep 08, 2005 10:09 pm

Actually I don't, I pretty much got to that point at the beginning of summer. I have since lost all my measurements that I went off. As for the pinouts, I just kept the board the way it was as it was already small, but lengthened the wire in between the 3 boards to position it wherever I wanted. I kept it as hassle free as possible. I almost had them switched around but caught my mistake just before soldering. As for the case I'm still wrapping my brain around how small/big I can make it. I'm making it out of oak. Not sure how easily it'll fit in there. I hope to finish it now that school has started. Since it's oak it's gonna be heavy as hell. Uhhh got off track there, all I can really state is that I have only pictures to go off of now.

usbcd36 · Post by **usbcd36** » Fri Sep 09, 2005 10:01 pm

About the innards, what are the board sizes (thickness too please, just measure the tallest component)? Also, can the other two (controller and video) be rebuilt very small or not at all? I am thinking of making a sub-mini NOACp and I'm wondering if that particular NOAC would fitâ€¦