my gamecube is being stupid

Maniac_Man · Post by **Maniac_Man** » Sat Sep 03, 2005 2:26 pm

my gamecube wont give me any sound and i dont know which fuse is for sound so i jumped all the ones near the connector but the sound still isnt working. does anyone know where the sound comes from so i can wire that directly from there to the connnector.

mikm240 · Post by **mikm240** » Sat Sep 03, 2005 6:18 pm

i know were u could wire the audio cable directly to the board if that what u mean ::: after u desolder the plug or if u find some other way
u look at with the memorey cards facing away and its the top furthest left pin

__________
|o000000000|--------the "o" equals the audio
|0000000000|

dont know if thats what u need if its not ignore

Post by **Gamelver** » Sun Sep 04, 2005 7:53 am

one problem could be that 12V isn't being supplied to the board....check the dc-dc converter board to make sure that on the 12V pin (I believe it's the second one from the right, if not then it's the last one on the right) there's 12V. if there isn't, then simply attach a wire from the 12V input of the dc-dc converter board to the 12V pin and you'll have sound. if 12V is already being supplied, then my suggestion would be to trace the audio line until you reach a component/fuse....and then short that component...or, simply trace it back to the IC or whatever and try wiring sound from that