Also i wanted to know how hard it would be to hook up the PSone screen to it.
Im thinking about puting it all into a project box.
thx
Noob...Plz help
Moderator: Moderators
-
dbozan99
- Posts: 7
- Joined: Thu Aug 11, 2005 1:16 pm
- PSN Username: dbozan99
- Steam ID: dbozan99
- Location: Owning Noobz at SSB64...
- Contact:
Noob...Plz help
ive been reading the forums for a while now... Im thinking about making a portable genesis. I was looking at the radiaca thing and i wanted to know how hard it would be to add a cartrige slot. Bens instructions dont make any sence to me at all.
Also i wanted to know how hard it would be to hook up the PSone screen to it.
Im thinking about puting it all into a project box.
thx
Also i wanted to know how hard it would be to hook up the PSone screen to it.
Im thinking about puting it all into a project box.
thx
-
bicostp
- Moderator
- Posts: 10491
- Joined: Mon Mar 07, 2005 5:47 pm
- Steam ID: bicostp
- Location: Spamalot
- Contact:
For PSone screen info, go to the Screen FAQ thread in the "Hacking Screens" section.
As far as the cart slot directions go, I assume you match up the pins. (A8 on the chip goes to A8 on the slot)
As far as the cart slot directions go, I assume you match up the pins. (A8 on the chip goes to A8 on the slot)
Last edited by bicostp on Thu Aug 11, 2005 3:53 pm, edited 1 time in total.
Twitter
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
-
JackFrost22
- Sir Posts-alot
- Posts: 4186
- Joined: Fri Jun 04, 2004 4:10 pm
@Jackfrost, Things have been changed a bit and its now the screens forum. Just to make it so people know its about all not just pocket tvs.
@Demonofaj, Yes N/A are for the most part useless.
@Demonofaj, Yes N/A are for the most part useless.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too
I am a geek.
-
usbcd36
- Posts: 1293
- Joined: Sun May 15, 2005 5:04 pm
- Location: Inside Samus's arm cannon [gulp]___ Gender: Male
Re: Noob...Plz help
First of all, hooking a screen up is easy, connect the audio spot on the Radica to the left audio spot on the screen. Connect the video spot on the Radica to the composite video in on the screen. Tie the grounds together. The diagram for the pinout of the PSone screen is in the screens forum sticky.dbozan99 wrote:Also i wanted to know how hard it would be to hook up the PSone screen to it.
Im thinking about puting it all into a project box.
thx
Second, project boxes usually make an ugly portable that is much bigger than it has to be. Use aluminum strips and engraving plastic, like it says in Ben's book.