sleek and cool nesp

XPCportables · Post by **XPCportables** » Tue Aug 09, 2005 2:10 pm

i posted about it in my thread for the famulator but i wanted more feedback so here it is

the case is going to be made out of one of those leathery sunglasses cases a hip gear screen and a famiclone

maybe a power player

Kai · Post by **Kai** » Tue Aug 09, 2005 2:14 pm

that looks great

XPCportables · Post by **XPCportables** » Tue Aug 09, 2005 2:55 pm

thanks

BloodNess · Post by **BloodNess** » Tue Aug 09, 2005 3:01 pm

edit the title

XPCportables · Post by **XPCportables** » Tue Aug 09, 2005 3:04 pm

how? im new

*o* · Post by ***o*** » Tue Aug 09, 2005 3:39 pm

click edit on the first post in the thread and change the title

XPCportables · Post by **XPCportables** » Tue Aug 09, 2005 4:26 pm

thanx a lot

bioniclebert · Post by **bioniclebert** » Tue Aug 09, 2005 5:18 pm

use a power player, theyre so easy to use.

edit: Oh so easy to use. I got a backup one and modded it completely in about an hour. It will take patience, That was my 3rd one. Dont be afraid to do what you have to do, and believe it will work. I didnt test the third one until it was all done, and it worked. Im not saying not to check it, I actually mean to take percuations on what you do. I had to move the NES every time I wanted to check it. Then it would end up breaking once I set it down, so I would have to bring it back over to fix, still not knowing wether it worked or not. so try not to move it around much until you can plop it in place and leave it there. the NES is just sitting here waiting for a screen.

and some money of course..

XPCportables · Post by **XPCportables** » Tue Aug 09, 2005 5:36 pm

thanks for your comments

atkafighter · Post by **atkafighter** » Tue Aug 09, 2005 6:42 pm

I just had an idea (its not really possible but sounds really cool). Well, what I would try (and fail at doing) is to make the screen one half of the insides, and the controls the lower half of the insides (along with the batteries). I wouldn't put a cart slot on it (GameGrrl style) so it would be pretty small. Kind of like a DS you could shut the sunglass case and it would protect your screen. People wouldn't even know that you had a NESP inside your sunglass case. If the super joy board is small enough to fit in a sunglass case I would really try it.

BloodNess · Post by **BloodNess** » Tue Aug 09, 2005 6:48 pm

HMM...*looks at grandpa's glasses case*

bioniclebert · Post by **bioniclebert** » Tue Aug 09, 2005 6:55 pm

its not about the superjoy, Im not shure the screen would fit! 2.6" diagonal! that dosent even include the board!

the super joy would fit in there so easilly. Its smaller than the NES controller board!

XPCportables · Post by **XPCportables** » Tue Aug 09, 2005 6:56 pm

that would be sweet atkafighter. i might try that before i cut the holes in the case for the screen and buttons.

soundwave · Post by **soundwave** » Tue Aug 09, 2005 8:52 pm

Better get a really big glasses case, one for a coke-bottle pair.

XPCportables · Post by **XPCportables** » Tue Aug 09, 2005 9:16 pm

what kind of batteries and how many of them do you think i should use?(taking size into consideration) i was thinking like four AAs but im not sure what kind of battery life i could get from that. 'note' i would rather not mount any batteries externally, but i will if i have no other choise. it should still be small even with an external pack.