screen power diagram?

new york cheech · Post by **new york cheech** » Sat Aug 06, 2005 6:56 pm

can someone post or give me a link to a power diagram for where the power is wired into the board?

JackFrost22 · Post by **JackFrost22** » Sat Aug 06, 2005 8:46 pm

What screen???

new york cheech · Post by **new york cheech** » Sat Aug 06, 2005 8:54 pm

oh a ps1 screen

usbcd36 · Post by **usbcd36** » Sat Aug 06, 2005 9:20 pm

Check the sticky here, it has the entire pinout for a PSone screen (once you've opened it up, there are 4 white connectors on the main board, the two small ones go to the speakers and the other two large ones are the main connections for the screen). The power is on the far left. +7.5v is the positive and ground is the negative.

new york cheech · Post by **new york cheech** » Sat Aug 06, 2005 11:51 pm

far left of which one on which side?

atkafighter · Post by **atkafighter** » Sun Aug 07, 2005 10:33 am

Just go here http://benheck.com/phpBB/viewtopic.php?t=2278.

new york cheech · Post by **new york cheech** » Sun Aug 07, 2005 11:19 am

yeah ive seen that, but im still confused on where and what to solder the wires to.

usbcd36 · Post by **usbcd36** » Sun Aug 07, 2005 1:55 pm

You don't need to solder any wires to the screen, there will be cable clamps there, you just cut off the the end that is not plugged into it and use the wires to attach it. There is also a pic in the first part of the sticky.