NES controller on noac

kidw/32+systems · Post by **kidw/32+systems** » Tue Jul 26, 2005 1:45 pm

i need to know how to do this and does it act as the 1st controller

usbcd36 · Post by **usbcd36** » Tue Jul 26, 2005 1:53 pm

Ok, first we need to know what type of NOAC you have. You should check in the NES section for the answer, because there is a controller pinout there for one type of NOAC and probably others too.

vb_master · Post by **vb_master** » Tue Jul 26, 2005 1:57 pm

Use Pod, they have pinouts.
This should be in the Nintendo forum.
Close?

bioniclebert · Post by **bioniclebert** » Tue Jul 26, 2005 2:03 pm

Move it to nintendo forum, but i have the solution, use the glop top off of the controller and wire it to the NES board, If you want a Deatiled explination, il have to write it up

kidw/32+systems · Post by **kidw/32+systems** » Wed Jul 27, 2005 5:46 am

its the power player that looks like a DC
the glop is fried thats why i need to know how

bioniclebert · Post by **bioniclebert** » Wed Jul 27, 2005 8:48 am

kidw/32+systems wrote:looks like a DC...
the glop is fried

that is not good. I have not worked with the dreamcast version, but if the glop top is fried, you cant do a controller

If you manage to steal the glop top from the 2nd player, yes, you can get it to work.
as for pinouts, I have none in that version. only power player 3s

kidw/32+systems · Post by **kidw/32+systems** » Thu Jul 28, 2005 5:37 am

ok how do i get it off

jgibson · Post by **jgibson** » Thu Jul 28, 2005 6:43 am

I am having a similar problem and fried the NOAC. I hate frying things. Hey we have similar avatars, pretty cool. This is my 100th post!

bioniclebert · Post by **bioniclebert** » Thu Jul 28, 2005 7:53 am

kidw/32+systems wrote:ok how do i get it off

Cut around it, sand the leads, and solder wires to them, If it isint fried. Before you cut, follow the lines to see what they do.

I made the mistake of cutting BEFORE i looked at the wires. Big mistake.
It took me 2-3 days to try and get it working again, and it did.