psone led mod succesful!!!

Metroid fan · Post by **Metroid fan** » Fri Jul 15, 2005 9:42 pm

Good then it should work.

*o* · Post by ***o*** » Fri Jul 15, 2005 10:00 pm

lol if the leds are fried ive got 17 more

Metroid fan · Post by **Metroid fan** » Fri Jul 15, 2005 10:02 pm

Sweet

nos_slived · Post by **nos_slived** » Fri Jul 15, 2005 11:22 pm

I still think that you had an LED in backwards, because the resistor shouldn't. How many LEDs did you use, and what were the power requirements?

*o* · Post by ***o*** » Sat Jul 16, 2005 12:20 am

IT WORKS!!!!

its a bit dark

and the component i should bypass isntr there.....so im going to touch the back of the board till it works

*o* · Post by ***o*** » Sat Jul 16, 2005 1:05 am

it looks great the brightness is not a problem at all!!

soundwave · Post by **soundwave** » Sat Jul 16, 2005 1:08 am

Congratulations.

*o* · Post by ***o*** » Sat Jul 16, 2005 1:10 am

tthankyou!!!

*o* · Post by ***o*** » Sat Jul 16, 2005 5:40 am

you know the board in the base of the screen could i cut it down like this|?

daguuy · Post by **daguuy** » Sat Jul 16, 2005 8:12 am

you don't need the board in the base of the screen if you connect the stuff to the slots on the bottom of the screen pcb

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Sat Jul 16, 2005 2:37 pm

*o* go with a 22 ohm resistor because when i did a 10 ohm it would always fry my leds and crazy crap would happen too

*o* · Post by ***o*** » Sat Jul 16, 2005 3:51 pm

daaguy I want to wire it to that board to keep the connections (its easier)

and turbo tax i use 2 33ohm 1w in paralell it worked perfectly

Post by **Gamelver** » Sat Jul 16, 2005 4:40 pm

the resistor all depends on the specs of the leds and how many you use....

*o* · Post by ***o*** » Sat Jul 16, 2005 5:51 pm

i used 3 if anyone cares i used 3 and ot really even lighting

extremesonic · Post by **extremesonic** » Sat Jul 16, 2005 8:43 pm

yeah 10ohm is off i used 22(or 27 i think) and its much better. Use that voltage calculator(some one has the link)........ oh wait I do http://www.besthongkong.com/clrc.htm#parallel you should get 22 or 27ohm and both make it plenty bright.