Hip Gear Help

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
elliott
Posts: 97
Joined: Thu Jul 07, 2005 12:15 am

Hip Gear Help

Post by elliott »

I just got a Hip Gear for an Xbox that has the grey ribbon cable connecting the video board to the adjustment controls. The only info I can find on here is about the ones that have colored wires going between them. I am putting this in a GBO case and need to reconstruct the video controls. I found the Power, GND and Video leads before I took off the ribbon cable thinking I wouldn't need the controls, but without them the screen looks like crap. Can anyone help me out with a schematic of which holes in the board connect to what, and also what are the values of the pots and resistors that I need?
Top
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:
Contact gannon

Post by gannon »

I'm pretty sure I've posted this before, but here you go.
Image
Top
Post Reply

Return to “Portable Screen Hacking”