A couple of questions on N64p

noob boy · Post by **noob boy** » Wed Jul 06, 2005 2:04 pm

Q1: Can i run the 12v line on the n64 with 9.6 volts?
Q2: Are you positive that the nus-001 boards can run a 5 volts?
Q3: How exactly could i hook up the PSone screen to my N64 which pin to which pin and what pin is which? Would this work?

Q4: how would i add a memory card port on my N64p?

nos_slived · Post by **nos_slived** » Wed Jul 06, 2005 2:36 pm

1. Yes.
2. Nobody's really positive about anything.
3. Yes.
4. Just hardwire one to the controller extension slot.

Motoman · Post by **Motoman** » Wed Jul 06, 2005 3:17 pm

Instead of heatsinks can i put in a small computer fan?

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed Jul 06, 2005 3:18 pm

you still need the heatsinks

*o* · Post by ***o*** » Wed Jul 06, 2005 3:46 pm

use very small heatsinks and a fan

Motoman · Post by **Motoman** » Wed Jul 06, 2005 3:52 pm

Can i just keep those metal blocks that were on there and a fan? preferably this one?

http://www.radioshack.com/product.asp?c ... =273%2D240

*o* · Post by ***o*** » Wed Jul 06, 2005 3:57 pm

they do nothing and thats a perfect fan

Motoman · Post by **Motoman** » Wed Jul 06, 2005 4:24 pm

I think my n64 is fried... fuhk. I barely had it for 10 minutes. My mom is going to kill me. She said that if i fried another she will kill me.

Is there anything i can do to save it? Like jump a fuse or something?

G-force · Post by **G-force** » Wed Jul 06, 2005 6:12 pm

Ther are some small fuses on the audio and video lines that you could try jumping. Tell me if it works.

*o* · Post by ***o*** » Wed Jul 06, 2005 6:40 pm

how did you fry it?

Motoman · Post by **Motoman** » Wed Jul 06, 2005 7:26 pm

i have no clue how i fried it. I never touched that baby with anything metal other that the screws with a screw driver. I did lay it against a PSone screen circuit board. Maybe that was it. Then i went to check it with the power brick and nothing worked.

Hmm fuses on the A/V you say. I'll try jumpin them.

*o* · Post by ***o*** » Wed Jul 06, 2005 7:31 pm

i threw mine across tthe room and it still works

my old one i RIPPED off the ext port pulling thatsection of the board off.....it still lit up

Motoman · Post by **Motoman** » Wed Jul 06, 2005 7:40 pm

ohp... now i think i know why it fried. I put it down on the carpet when I was testing the a/v cord. It must've created static. STATIC!!

Motoman · Post by **Motoman** » Wed Jul 06, 2005 8:38 pm

yuericka!!!! (or however the hell you spell it) G-force i love you!!!! I tried jumping the fuse to the far right on the AV in and it works!!!. From now on you are hotter than *o*!!!! Tralalalalaaaa I'm happy! My mom is happy now too

She wont kill me anymore

*o* · Post by ***o*** » Wed Jul 06, 2005 8:52 pm

no-one i hotter than I!!