Psone screen clone "Brooklyn"

[Kai]

Hi
I finally got my psone screen clone made by a company called brooklyn
Cause I don't know that much about portabling(don't think the word exists)
could someone help me I need to connect the nes to the screen but how it doesn't look for me like a normal psone screen has someone used a brooklyn before
and will a 7,2V 2000mAh batterie work??

THX

Kai

[warbaby]

the battery should work fine, as long as its a PSone screen. check the labbel above the DC adapter port in the back. and to connect it? the easiast way would to just plug in the A/V cables directly into the aux. ports, just to test at least. yu can cut them , shorten them, or hardwire them too if yu wish.

[Black Six]

portabling(don't think the word exists)

Of course the word doesn't exist. The proper term is 'portablizing,' or alternately, 'portablising.' Any dictionary that does not contain these words is out of date and you should keep buying new ones until you find one that has it.

[Kai]

so I'm "portablizing" i see
back to the question what cables should i plug where? there are composite and audio on the back but it's the out put i think (exit is written above) do you have a diagramm for this playstation plug to cinch?

THX
Kai

[Turbo Tax 1.0]

could you take a pic of this screen and was it cheap

[Kai]

it cost 30€ + 7€for the post. I'll try too take a picture when I'm at home.

[Kai]

I found some pic's in another forum Justklick on one of the links on the Page linked beneath (Bild 1, Bild2...)
http://www.diybeamer.ch/forum/topic,196 ... e-tft.html

[Triton]

portablizing (v.)- 1. the act of making a portable see also : portablising

[Kai]

The screen is a sharp LQ6AN101 with some kind of controller added so does someone know how to use a sharp LQ6AN101 with out the psone controller ( some pinouts??) also I would like a pinout for these Playstation video audio plug

EDIT:
I'm worrying the screen could be brooken at the back side there are cinch ports for audio and video does someone know if they are input or output ports?? cause I can get picture on the screen please send mee a plug pinout for the playstation plug I really need to know if this display works!!!!

THX

Kai

[Kai]

The screen works but stripes appear moving from the top to the bottom how can this be created?? could it be to low currency not constant or something like this??

[Kai]

Hi
I got my screen working but the picture has on the right some space of the display which is not used and is there always a problem with the text? some words can not be read completely
would it work better with some other wiring (change the controller or something)
please answer

THX

Kai

[Dave]

It's normal to have extra space around the edges of the screen. That is the actual picture from the Nintendo, you may seem some "garbage" or random text in this area because on older tv the edges are rounded so nintendo dint think you would ever see this extra space. As for the wierd text, mediocre cartridge connection may be it. I'm not sure why text would be the only thing wierd though.

[Kai]

it not the catridge its the screen cause every game is the same and I don't think think the space should be like this it's only on the left so the pictures not in the middle of the screen (could someone make a pic of his display working perhaps with a little text on the screen)
THX

Kai

[Kai]

Hi
I tested a littel more and it indeed is the screen cause the source doesn't matter.
I testet with ps2 psone nes and tv-out

could some one send me the pinout or schematic of the sharp LQ6AN101

EDIT:
I just took the screen apart and on the backside of the LQ6an101 are some potis so perhaps the screen is just not ajusted right
there are 3 potis the text says: VCDC; H-POS ;VC0 any idea where this is good for?
Please i really need to know how to fix this screen

THX
Kai