lcd banding

mindstein · Post by **mindstein** » Sun Sep 26, 2004 5:41 pm

how would you adjust a it with Bens mod.

Dosen't he just tie it in with a wire?

Post by **gannon** » Sun Sep 26, 2004 5:52 pm

actually, now that I think about it you can't really adjust sync

If the video signal just isn't strong enough for the lcd you might be able to use a small transistor amp. Also, have you tested the atari's video on a different tv to see if there is still banding?

mindstein · Post by **mindstein** » Sun Sep 26, 2004 5:52 pm

I just noticed no wavy lines when I go to black and white. Only when in color.

mindstein · Post by **mindstein** » Sun Sep 26, 2004 5:53 pm

there is no banding on a regular tv

Post by **gannon** » Sun Sep 26, 2004 6:45 pm

hmm...it might just be a weak video signal then

Post by **SpongeBuell** » Sun Sep 26, 2004 7:20 pm

try a video amp

http://www.classicgaming.com/nestable/schematics.shtml

JackFrost22 · Post by **JackFrost22** » Sun Sep 26, 2004 7:28 pm

yeah I my uncle got his modded atari to run on a Psone screen by using a video amp. I should ask him how he did it.....

Post by **SpongeBuell** » Sun Sep 26, 2004 7:31 pm

that's probably it above, I should use that on my atari

mindstein · Post by **mindstein** » Sun Sep 26, 2004 8:09 pm

thanks everyone!! I will try the video amp an let you all know how it goes.
I'll have to hit the electronic store tomorrow.

Post by **SpongeBuell** » Sun Sep 26, 2004 8:12 pm

hehe... I'm taking an electronics class right now (boy, did this site give me a good start) and I know my teacher pretty well (same guy that let me use the laser engraver on my atari) and if I ever really needed a transistor or something, I'm sure he'd let me. he was ok about me taking some diodes, though I decided I probably won't need them