My first portable

Thornwillow · Post by **Thornwillow** » Mon Jun 06, 2005 5:18 pm

Im getting ready to build a Genesis Portable, im working on a case from scrapt right now, and if it works good, im going to buy a case from Triton, i hope it works though...

nos_slived · Post by **nos_slived** » Mon Jun 06, 2005 5:27 pm

Lucretius wrote:You two should ...how can I end the statement without saying something "unwanted"?

...

I can't...

anyway, great job on the SixtyFree!

I'm sorry if I disturb you, but it is just so dang hard to resist *o*'s pure charm and red hot heat!

*o* · Post by ***o*** » Mon Jun 06, 2005 5:52 pm

d/w nos oneday you will find a great man

nos_slived · Post by **nos_slived** » Mon Jun 06, 2005 7:00 pm

I CALL LUC!

Post by **Triton** » Mon Jun 06, 2005 7:28 pm

so you are interested in a genisis case thornwillow? cool

extremesonic · Post by **extremesonic** » Mon Jun 06, 2005 8:55 pm

That clear polystyrene looks very nice fo this kind of project. Was it easy to cut, and where did you find something like that?

Thornwillow · Post by **Thornwillow** » Mon Jun 06, 2005 10:42 pm

If i get a working Genesis Portable im definatly going to buy one, lol

Post by **Triton** » Tue Jun 07, 2005 11:10 am

i have some translucent polypropylene that i might be using on some of my cases. i hope my electric grill can get hot enough!

Joes2Silly · Post by **Joes2Silly** » Tue Jun 07, 2005 12:09 pm

that is one sweet N64p, great job on the case

SifuF · Post by **SifuF** » Wed Jun 08, 2005 8:44 pm

watermelon wrote:how did you connect the aluminium to the plastic top?

First with superglue and then epoxy on the inside to strengthen it.

extremesonic wrote:That clear polystyrene looks very nice fo this kind of project. Was it easy to cut, and where did you find something like that?

It was fairly easy to cut, but i couldn't do it all with an exacto knife. I cut the middle roughly with the dremel and then filed it smooth.
It's easy to find, just go to any big hardware store, as it's primary use is an alternative to glass for shed windows etc... It's quite cheap too, cost me Â£8 for a sheet big enough for at least 3 portables. Thats a big difference compared to the Â£50

that the trophie shop wanted for a small sheet of engraving plastic!!

cyco vision · Post by **cyco vision** » Thu Jun 09, 2005 3:50 pm

I still don't know how to hook up a PSone screen to an N64.

If I did I'd be done with mine.

daguuy · Post by **daguuy** » Thu Jun 09, 2005 4:57 pm

cyco vision wrote:I still don't know how to hook up a PSone screen to an N64.

http://benheck.com/v-web/bulletin/bb/vi ... php?t=2278
connect video out from n64 mobo to pins 1,2,3,4 on slot 2. it's pretty simple

SifuF · Post by **SifuF** » Thu Jun 09, 2005 7:39 pm

cyco vision wrote:I still don't know how to hook up a PSone screen to an N64.

If I did I'd be done with mine.

The composite line needs a cap and a resistor, otherwise the colours will be a bit off (at least my PAL version did) I got these from inside the AV cable.

*o* · Post by ***o*** » Fri Jun 10, 2005 1:27 am

r u in australia?

do u know where to get a pal psone screen?

jackdanielz666 · Post by **jackdanielz666** » Mon Jun 13, 2005 1:49 pm

doode love it making my own but how can yoc connect the batts and too whare plz I need help!!!!!