GCp by B!00dN3$$

BloodNess · Post by **BloodNess** » Tue May 24, 2005 3:13 am

I will start building a GCp and am planning on building or redesigning a GameCube. So any Help or suggestions you might have, come right in...

*o* · Post by ***o*** » Tue May 24, 2005 3:14 am

what do you want to do to it?

BloodNess · Post by **BloodNess** » Tue May 24, 2005 3:20 am

My GCp design it's on my sig link...It's a little crappy cause I did it in Paint but it's preety decent. The Redesigned GameCube ,er...design will be posted later.There are some few adjustments to make on the design. On Gamelver's thread "Handheld gamecube attempt" if you read from the page 20 or 21 you will see my first posts and the start of my project but God Knows i have had an idea for building a GCp maybe a year ago , Long before i came across this site. I've been getting some help from other users so any help WILL be useful so ... I will keep you informed.

BloodNess · Post by **BloodNess** » Tue May 24, 2005 3:21 am

what do you mean?

*o* · Post by ***o*** » Tue May 24, 2005 3:27 am

with you redesign what do you want to do to it?

BloodNess · Post by **BloodNess** » Tue May 24, 2005 3:30 am

I guess you can call it a case mod. It started as a sketch of what i would like a N-Revolution to be but i saw the revolution and it cae to my ming that i could make a new case for tha Gamecube and fit everything in there-obviously- So it's a case mod,sorta...

*o* · Post by ***o*** » Tue May 24, 2005 3:45 am

cool goodluck

please upload your design pics

Post by **Triton** » Tue May 24, 2005 6:44 pm

not to be rude, but could you please use the normal font? we dont need maroon bold text to read what you have to say dude, its a little annoying

daguuy · Post by **daguuy** » Tue May 24, 2005 7:55 pm

http://img21.echo.cx/my.php?image=bpgc1ab.png looks a bit hard to make unless your really good at vacuum forming or something

*o* · Post by ***o*** » Wed May 25, 2005 1:04 am

it looks impossible witout vaccuum forming and that would be VERY tough

G-Prime · Post by **G-Prime** » Wed May 25, 2005 4:54 pm

If you are willing to put up the extra money and have the skill then you can just mold a case. Build (or care if you have to) out of wood (clay is a lot harder to work with). Then just fill in the cracks in with cocking and coat the thing it finishing gloss to get rit of the "wood grain". the buy some RTV Silicone, polyurethane mix, and some polyurethane dyes. make a mold with the Silicone and cast it with the polyurethane then all you have to do is drill a few holes. I know it sounds hard but it is only as hard as your case is complex.

BloodNess · Post by **BloodNess** » Wed May 25, 2005 9:20 pm

I dunna if i'll build a case outta wood. it was the first material that came to my mind. Cause Ben Heck's first PS1's case was made outta wood. About that mold...

you have to explain that better , G-Prime,cause it sounds kinda cool and easier than vacuum forming. So, if oyu could explain that better, it would help me.

About the design pics that *o* asked for. I'll try to either make the design in paint and post it, or i'l fix my scanner and well, scan the disign in. But i'll get on that right away. Thanks for replying and showinginterest in my projects. OH, and Triton, how's this color...Just kidding, It was a waste of time anyways

BloodNess · Post by **BloodNess** » Wed May 25, 2005 9:27 pm

My last post was incomplete. I forgot to say that i may do the case in wood, well not me. I'll ask my grandpa cause he is REALLY good with wood. So well you tell me what to do...that was it. OK

BloodNess · Post by **BloodNess** » Wed May 25, 2005 9:38 pm

how can i whatever it's called a poll i want to "post" a poll about which gamecube redesign i'll do. tell me how i cand do it and i'll reveal the possible candidates.

BloodNess

shelter pitfall · Post by **shelter pitfall** » Wed May 25, 2005 10:26 pm

Psst. Use da "Edit" button.