Psp on-the-go charging?

Want to just shoot the breeze? Forum 42 is the place!

Moderator: Moderators

nos_slived
Higher Idiot
Posts: 3476
Joined: Mon Mar 21, 2005 6:32 pm
Location: Burnaby, BC, Canada
Contact:

Post by nos_slived »

Have you tested it to make sure it works?
Image
shmagoogin77
Portablizer
Posts: 1469
Joined: Sun Apr 17, 2005 6:10 pm
Location: My desk

Post by shmagoogin77 »

it looks pretty nice
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

yah, it works on the ds (even with 4 regular AA's, which is 6v) nothing is wrong with it. i'm still finishing the PSP one, though.
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

HELP! I thought it would work, but the cable i put in the psp doesn't do anything.
Any ideas on how to check if the cable would run power to the psp if it was a wall plug?
nos_slived
Higher Idiot
Posts: 3476
Joined: Mon Mar 21, 2005 6:32 pm
Location: Burnaby, BC, Canada
Contact:

Post by nos_slived »

Do you have the polarity correct?
Image
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

yah, i tried both ways. nothing. Like i said, any way to see if it even works with the PSP?
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

Pic of the cable in the psp:
Image
it doesn't work, even with the polarity the other way. any ideas?
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

Well, i'm not sure, but i'm going to solder it on soon. Anyone have any ideas on how to test it beforehand? I'll Edit this post with pics of the finished product.
vb_master
Moderator
Posts: 4793
Joined: Tue Jun 08, 2004 9:52 pm

Post by vb_master »

[cough]MACRO MODE![/cough] Make sure you don't fry your PSP!
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

i tried! If you put 4x AA's, (6v) it doesn't do anything. Not even light the charger light. with 4 rechargable AA's (4.8V), it works
soundwave
Senior Member
Posts: 3653
Joined: Wed Feb 23, 2005 1:51 pm
Location: Connecticut

Post by soundwave »

Its because rechargeables can put out more current.
nos_slived
Higher Idiot
Posts: 3476
Joined: Mon Mar 21, 2005 6:32 pm
Location: Burnaby, BC, Canada
Contact:

Post by nos_slived »

Not all. It is probably because the PSP can take less then 5.2V (due to voltage drop in a linear function with the capacity), but it refuses more than 5.5V (maybe a bit higher).
Image
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

rechargables put out LESS current, if anything.
Shhh! I'm not officially back yet.
nos_slived
Higher Idiot
Posts: 3476
Joined: Mon Mar 21, 2005 6:32 pm
Location: Burnaby, BC, Canada
Contact:

Post by nos_slived »

1. You stole my dynamic signature.
2. You stole my proverb based aroung cennar.
3. You're thinking capacity. They can handle extreme loads, it doesn't matter. Only difference is battery life.
Image
totokan
Senior Member
Posts: 1785
Joined: Wed May 18, 2005 12:29 pm
Location: 127.0.0.1
Contact:

Post by totokan »

2)No. You may have used it, but i have been using it as a signiture for a long time (2 or 3 years).
3)Yeah, i know. i screwed up there.
EDIT: Removed the sig. I don't want to start an argument over nothing.
Last edited by totokan on Mon May 23, 2005 6:34 pm, edited 1 time in total.
Shhh! I'm not officially back yet.
Post Reply