noac has arrived

[maddox]

still no video, just greenish screen

E D I T

ok, folx, I soldered the noac back to its original pad/power/a & v out board.
It's still alive ! Must be a failure in my testing circuit.
But where the heck is that failure ? I think I'll do a complete new testingboard.


E D I T - 2

yeah did it noac is runnin on my test-circuit.

now I need only a propper screen, a 60 to 72 pin adaption, a propper housing and a controller's guts.

[maddox]

>>> PUSH

argh . . .
I can't get that damn original NES-controller to work with the NOAC.
The only thing that works halfway is the A-button.
A scrolls pagewise the "crapy-games".
No other button is functional.

has anybody a idea ?

[gannon]

do you have the p/s and clock lines mixed up?

[maddox]

Power / Video / Player 1 Pad

01 = + = + Volt ------------------------------ NES-Pad +5Volt (white)
02 = - = Ground ------------------------------ NES-Pad ground (brown)
03 = PL = Paddle/Lightgun
04 = CK1 = Pad Clock (player 1 pad) ----- NES-Pad clock (red)
05 = D01 = Data 01 pad -------------------- NES-Pad data (yellow)
06 = NC = Not Connected
07 = Res = Reset
08 = D3 = Data 03 pad
09 = D4 = data 04 pad
10 = B = ??? --------------------------------- NES-Pad latch (orange)
11 = V = Video
12 = A = Audio

These are the wires from NES-Pad conected to NOAC PCB.

>>> E D I T <<<

after wiring around from left to right an back I decided to hook up the original second controller that came with the NOAC.
And as I thought same problem as with the NES-Pad.
Only A-button is working (Impropper).

[maddox]

Any help for me ??
Controller still won't work propper.