moose jr.'s cart slot

*o* · Post by ***o*** » Fri May 13, 2005 2:53 pm

yes im guessing it was not adequate

*o* · Post by ***o*** » Sat May 14, 2005 5:40 pm

how did gannon do his?

Warrior_Rocker · Post by **Warrior_Rocker** » Sat May 14, 2005 5:41 pm

good question, but more importantly who would want their cart sticking out like that.....

*o* · Post by ***o*** » Sat May 14, 2005 5:43 pm

i want it to go down to board level and facing down

Warrior_Rocker · Post by **Warrior_Rocker** » Sat May 14, 2005 5:45 pm

best bet it is to do it the way ben did it..., he put the cart slot horizontally below the n64 board, nifty... thats kinda how im going to do mine

*o* · Post by ***o*** » Sat May 14, 2005 5:50 pm

good idea thanks

this was my roiginal idea

http://img178.echo.cx/my.php?image=untitled8hz.png

Warrior_Rocker · Post by **Warrior_Rocker** » Sat May 14, 2005 5:53 pm

i mean that makes good for a thinner portable, but all i remeber from the n64 was taht if u even looked at your cart wrong the game might freez, and im not a big fan of having the cart stick out more than it has to, however we must do what we have to, and if thats how u wanna do yours, more power to you, and i hope it turns out great

*o* · Post by ***o*** » Sat May 14, 2005 6:57 pm

this is my concept http://benheck.com/ipw-web/bulletin/bb/ ... php?t=2957

i was looking at my n64 and a tapped the cart and it froze so i decided to use this idea

Warrior_Rocker · Post by **Warrior_Rocker** » Sat May 14, 2005 7:35 pm

its not bad at all, go w/ it

*o* · Post by ***o*** » Sat May 14, 2005 8:06 pm

thanks for your help

Warrior_Rocker · Post by **Warrior_Rocker** » Sat May 14, 2005 8:29 pm

do you have aim? if so just im me at 'WarriorRocker'

that we we keep the slowness of posting to a miniumum?

*o* · Post by ***o*** » Sat May 14, 2005 8:49 pm

i dont use aim imlike forums becausen i can go back years from now

Warrior_Rocker · Post by **Warrior_Rocker** » Sun May 15, 2005 6:44 am

this is kinda how i set my cart slot in my n64p

under all that tape is the converters, the scsi cable i used to wire the cart plug... etc...

*o* · Post by ***o*** » Sun May 15, 2005 3:29 pm

how did you attach it to the mobo?

Warrior_Rocker · Post by **Warrior_Rocker** » Sun May 15, 2005 3:56 pm

it was cool becuase i was able to use a solderless move of the cart slot, by using a special 6'' 50 pin extension cable, that had a male port on one end and a female port on the other, i just plugged the male end inot the n64 and the female end on the cart plug, had to ben the pins a little to get it in there but, once it got plugged in, it worked like a dream, however i dont think im going to do it that way this time