Support? No Sound.
Moderator: Moderators
Support? No Sound.
I Recently put the SNES on full battery support, and hooked it up to the TV, but there was no sound. The video is fine, however. I skipped some unnessicary steps, such as the
controller step,
capacitor step,
power/reset button step,
and A/V plug step.
What happened? I'm using a Mini Snes with a standard Duracell 9V.
Thanks,
Sweebez
controller step,
capacitor step,
power/reset button step,
and A/V plug step.
What happened? I'm using a Mini Snes with a standard Duracell 9V.
Thanks,
Sweebez
-
SgtBowhack
- Posts: 831
- Joined: Wed Dec 08, 2004 5:16 am
- Location: Chicago, USA
-
SgtBowhack
- Posts: 831
- Joined: Wed Dec 08, 2004 5:16 am
- Location: Chicago, USA
No, the AC adaptor is a last resort, I finally got all the wires hooked to the resistor...
-------------------
Well, here's everything that happened:
1. I did the steps previously mentioned, all in ben's book.
2. On AC POWER, it worked fine, like it always had.
3. After having a heckload of time trying to solder those 3-some wires to the regulator,
I hook up the system to the TV, with power coming off of a 9V, and No Sound At All.
Here's what I've got so far...
PROOF THAT THE VIDEO WORKS
http://www.geocities.com/sweebezhtml/snes1.jpg
FRONT/TOP WITH F-ZERO PLUGGED IN
http://www.geocities.com/sweebezhtml/snes2.jpg
BACK/TOP RUNNING OFF THE 9V
http://www.geocities.com/sweebezhtml/snes3.jpg
BACK/BOTTOM (SORRY ABOUT THE FLASH)
http://www.geocities.com/sweebezhtml/snes4.jpg
FRONT/BOTTOM (AGAIN, I CAN'T TURN FLASH OFF)
http://www.geocities.com/sweebezhtml/snes5.jpg
If you need other pictures to solve the problem, or any other information,
feel free to ask. It's so odd that the video works just fine, but the sound is completely dead.
I was even able to play it for half an hour or so too...
-------------------
Well, here's everything that happened:
1. I did the steps previously mentioned, all in ben's book.
2. On AC POWER, it worked fine, like it always had.
3. After having a heckload of time trying to solder those 3-some wires to the regulator,
I hook up the system to the TV, with power coming off of a 9V, and No Sound At All.
Here's what I've got so far...
PROOF THAT THE VIDEO WORKS
http://www.geocities.com/sweebezhtml/snes1.jpg
FRONT/TOP WITH F-ZERO PLUGGED IN
http://www.geocities.com/sweebezhtml/snes2.jpg
BACK/TOP RUNNING OFF THE 9V
http://www.geocities.com/sweebezhtml/snes3.jpg
BACK/BOTTOM (SORRY ABOUT THE FLASH)
http://www.geocities.com/sweebezhtml/snes4.jpg
FRONT/BOTTOM (AGAIN, I CAN'T TURN FLASH OFF)
http://www.geocities.com/sweebezhtml/snes5.jpg
If you need other pictures to solve the problem, or any other information,
feel free to ask. It's so odd that the video works just fine, but the sound is completely dead.
I was even able to play it for half an hour or so too...
-
SgtBowhack
- Posts: 831
- Joined: Wed Dec 08, 2004 5:16 am
- Location: Chicago, USA
-
nos_slived
- Higher Idiot
- Posts: 3476
- Joined: Mon Mar 21, 2005 6:32 pm
- Location: Burnaby, BC, Canada
- Contact:
I've actually been meaning to bring this up for a long time. You don't plug your system in while it's on the carpet, do you? I hope realize that the fibers of your carpet could bridge your connections, destroying vital parts. If you do plug it in while it is on the carpet, you are lucky that you haven't fried it (or you).

-
SgtBowhack
- Posts: 831
- Joined: Wed Dec 08, 2004 5:16 am
- Location: Chicago, USA
-
SgtBowhack
- Posts: 831
- Joined: Wed Dec 08, 2004 5:16 am
- Location: Chicago, USA
