Bending the springs, not working....

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator: Moderators

Post Reply
Insert_Name_Here
Posts: 91
Joined: Fri Feb 25, 2005 5:15 pm
Contact:

Bending the springs, not working....

Post by Insert_Name_Here »

My NES has the dreaded "flashy screen" problem. I looked up how to fix this and i bent up all the connector springs, but its still giving me flashing and blank screens. Does anyone have any clue as to what this may be?
SNESp- Halfway broken : /
jgibson
Posts: 196
Joined: Mon Feb 28, 2005 11:13 am
Location: Hickory, NC

Re: Bending the springs, not working....

Post by jgibson »

Insert_Name_Here wrote:My NES has the dreaded "flashy screen" problem. I looked up how to fix this and i bent up all the connector springs, but its still giving me flashing and blank screens. Does anyone have any clue as to what this may be?
Have you tried cleaning the cart connector and your games. I used a Q-tip with a little water and cleaned my games. I used the edge of a PCB with a small piece of cloth on it to clean the connector as well. They were truely nasty. Dirt and oxidation build up can prevent your games from making a connection with the connector even if all of the pins are bent up. After cleaning, my games as well as my nes work great.
Life is a lot like a video game without the extra lives and continues.
bicostp
Moderator
Posts: 10491
Joined: Mon Mar 07, 2005 5:47 pm
Steam ID: bicostp
Location: Spamalot
Contact:

Post by bicostp »

I used q-tips and rubbing alcohol. A couple were very bad, so I carefully cleaned them with a pencil eraser. As a last resort, I used an insanely fine sandpaper to scour the oxidation away. (Don't be too vigorous, or else you'll have to coat the contacts again, as I did with Pitfall II for the 2600. Just some radioshack stick-on traces re-enforced with solder, no biggie!)
goodie
Posts: 824
Joined: Mon Oct 11, 2004 1:02 pm

Post by goodie »

Bending the contacts will wear down the pins on the cartridge. Just get a new connector off ebay. They're higher quality than the official connector, so it will get a much better connection.
Or you can call Nintendo and tell them that your NES won't play the cartridges anymore, and that you heard that a new 72-pin connector would fix it. Ask if they could send you a new connector. They will ask you if you know how to put it in. Say yes. Then they will send you a connector for free. Sure, it's the exact same kind of connector that was originally in the NES, but it will be brand new. :)

Disclaimer: I'm not sure if Nintendo is still doing this. I read it on some other message board a while back.

Hehe, disclaimers are fun to write. :P
mnbvcxzlkjhgfdsapoiuytrewq
Nes Man
Posts: 485
Joined: Sun Sep 05, 2004 7:55 pm

Post by Nes Man »

Yeah, they sent me one a year ago. :wink:
Dude, it's Duck Hunt.
soundwave
Senior Member
Posts: 3653
Joined: Wed Feb 23, 2005 1:51 pm
Location: Connecticut

Post by soundwave »

Wow, no expense? Thats pretty awesome.
Post Reply