Bush's N64 Commission for Neild NEED HELP!!!

[Bush]

A member on MR asked me to make him a very simplistic portable. Here's the case front:

You like?

[The Smooth]

Wow, that's just cawesome dude!

[Bush]

AAAAAAAAAAAAAAAAND PROBLEM:

Relocated cart slot twice, doesn't work, but I'm pretty sure it's not fried. There are no shorts, everything is perfectly jointed, etc. I honestly don't know what to do here, unless I need to ground the shielding?

[argelfraster]

What kind of wire are you using/What length?
Bondo work looks very good, although the screen is off-center, and by putting a different thickness of black sticker paper (or whatever it is) you only make it more apparent.

[Bush]

Its off center because thats how the dvd players case was made. Im using speaker wire, IDE and some general purpise wire, 4in long.

[Bush]

GO AMERICA PLINK YEAH!!!!

I took a breather from frustrating myself, and remembered that on the first attempt, i had soldered to one of the pins on the bottom because one of the wires came loose on top and I couldnt get a god angle to solder it on. Well, I never removed all the solder before the second try, and that was the very problem. The solder blob was touching one of the ground pins. I must say Tchay, that your advice makes complete sense.

[Bush]

I'm getting some sort of interference on the screen and a high pitched noise from the screen's board. It also turns off when I input audio. It isn't interlacing, It moves in a wave diagonally across the screen. I grounded everything. I think the DVD board doesn't like the N64 drawing power from it, as I have power going battery-DVD player-N64. I'll try battery-dvd and battery-n64, although I dont see why it would make a difference. It also has an S-video input, which is ideal, but that doesn't work either. Its wired properly and all, maybe the DVD board only outputs S-video and inputs composite.

[Bush]

More problems; I hooked up the psone screen, and everything worked fine, but somehow I ended up touching the 100v backlight thing and shocked myself silly. Afterward, I couldn't get the screen to display the n64. Its not fried, I did the RCP test. I have no clue what to even try, can someone please help me?

[Bush]

Didn't work, and on another screen, I'm only getting the green fuzzy screen.

[Hrduncan]

any updates ? or has this commision been aborted

[Bush]

Case is done, need to redo cart relocation and rewire power as well as AV. i had a lot of problems due to crappy parts, but now i should be good. Ill work on it tomorrow and will finish it soon hopefully.