3.3v line

[GamecubePerson111]

When wiring up to the 3.3v line from a pth08000 or a pth08080, for the 2k ohm resistor, what's the wattage that the resistor should be?

[marshallh]

1/8th or 1/4 watt should be more than enough

[GamecubePerson111]

I found a 2.2k ohm 1/8 W resistor at radioshack, would that still work correctly?

[argelfraster]

I found a 2.2k ohm 1/8 W resistor at radioshack, would that still work correctly?

Marshallh just said 1/8 is ok...

[GamecubePerson111]

Yeah but I mean on a guide somewhere i read the resistor is supposed to be a 2k ohm resistor, would the difference in ohms still properly work by using a 2.2k ohm resistor?

[argelfraster]

I use 2.2K as well, works fine.

[GamecubePerson111]

Ok that's all i needed to know, thanks

[GamecubePerson111]

Also will this work fine with the TI regulator?

http://www.radioshack.com/product/index ... Id=2102510" onclick="window.open(this.href);return false;

[timmeh87]

yes

[Bush]

If you do two 1k's in series you will get 2k, the ideal value.

[brunoip]

If you do two 1k's in series you will get 2k, the ideal value.

the ideal value is 1,85

[Bush]

Well, THEN DO THAT GAWSH