FC Twin controller pinout

[Goldstubble]

Does anyone happen to know the pinout for the FC Twin controller?
I'm not actually using the controller, just was testing with it and didn't work properly.
The ground and Vcc would be the same, as would the data clock and the P/S, but there are two more cables in the controller and only one would be needed for the data input.

Does the extra cable use one of the 'not used' ins on the mobo?

[Goldstubble]

Ok, I figured it out after some testing. The extra cable is an extra data cable.

Here is a pic:

P1080693.JPG (209.12 KiB) Viewed 1576 times

Cables are labeled as they come from the controller.