-=Nsixty4=-

[humakabula1]

whilst building my 360laptop and yet another 360 mod i had an idea!
a Nintendo 64 laptop! the only other one out there i have seen was not the best.
i have a name for it (may not be the best name)
i will call it the "Nsixty4"

The overall design will be a small laptop shaped rectangle (around about the same size as a ps2 slim)
when its open the cartridge slot will be in the centre of the bottom half.

heres a few pics i made with my paintbrush application...


this is the bottom half of the laptop (base when open)


this is the screen area (inside when open)

i plan on vacume forming the case in four parts..
the bottom half of the console section
the top half of the " "
the bottom half of the screen section
the top half of the " "


this will be my first REAL

(most of my mods are powered by a wall socket)

[argelfraster]

Having the cartridge slot in the middle of the laptop can block some of the screen.
I suggest relocating it to the back, DS style (under the screen).

[blaze3927]

but under would mean less ease of access,
maybe front loading :\

[humakabula1]

i my other idea was to have it front loading.
so its like a GBA except at the front

[ishowernaked]

i my other idea was to have it front loading.
so its like a GBA except at the front

sounds better, but what about the controllers? it would be most comfortable to have the controller ports on the front.

[N64BitModder]

If the front of the base humakabula1 can fit the 4 controller ports and the cart ishowernaked so he can front load the cart and have the comfort of the controller ports in the front.

Like this:

[humakabula1]

A little update...
i changed a few things around


heres the overall design from the top.


Heres the front of the case whilst its shut.


Heres the back of the case whilst its shut.


This is what the whole unit will look like.
(the area where the games are will be a drawer)

thats just to get the general idea of it.
i will most likely make around 10 of these all using a different plan

[ishowernaked]

the drawer idea is good, but i still have to disagree with having the cart slot vertical. is it because you're afraid to relocate it? because it's really worth it, and not extremely difficult. i would have to say that if you were to put that cart slot there, you WILL kill this overall design.

[budnespid]

It his case is thick enough, he won't have any problems. It's his design. That means he can do whatever he wants. He probably has it like that for his personal preference and convenience, so let him do what he wants.

[ishowernaked]

It his case is thick enough, he won't have any problems. It's his design. That means he can do whatever he wants. He probably has it like that for his personal preference and convenience, so let him do what he wants.

okay, sheesh. i didn't mean to offend him. i was just making a suggestion or two. sorry.

[humakabula1]

i have done a few tests on many N64s (you can never have to many N64s!)
i relocated a few slots done som power mods and the like.
i may relocate the slot to the side?
any ideas on that?

[ThePortablizer]

PICTURE TIME!!!

[Basement_Modder]

Go for at least a 7 inch screen if its a laptop.

Even that may be a bit small.

[humakabula1]

theportablizer, i beleive this is my post
im going to use a screen sized inbetween 7&10"
most likely 7

[ThePortablizer]

NOOOOOO!!

5 INCH MINI LAPTOP!!

or 7 inch mini laptop!!