Cart Relocation Using SCSI?

[N64BitModder]

I found this site online that tells of this guy who uses a 50 pin male SCSI coupler to attach a 50 pin SCSI cable to a cart.
http://home.earthlink.net/~moose_jr/ele ... gress.html
Problem is i cant find a SCSI male coupler, can anyone help?

[metalcookie]

Do it the old fashioned way, like a lot of people do, by Soldering 48 individual wires over and over again until you're 100% satisfied with the job

[bassmasta]

http://forums.benheck.com/viewtopic.php?f=5&t=36846" onclick="window.open(this.href);return false;

[N64BitModder]

http://forums.benheck.com/viewtopic.php?f=5&t=36846

Thats for the SCSI cable bassmasta, i am looking for its 50 pin male connector like moose jr. used. i am not a pro at soldering and i dont have the time or patience to wire 48 wires from the base to the slot cart. but thanks anyway for replying

[neverused]

Fry's electronics should have some or just use a 50 pin- 2 row pin/socket header combo which would work fine.

http://forums.modretro.com/viewtopic.php?f=33&t=2860" onclick="window.open(this.href);return false;

I may post a pic someday soon if I can.

[N64BitModder]

i still cant find it i can only find a 80 pin double row header, but thanks anyway neverused.

[blaze3927]

http://gold-tek.com.tw/english/products ... asp?id=273

might have to order one custom made

or try these(not sure if their the right dimensions) but should be ok

http://cgi.ebay.com.au/50-Pin-1-27mm-Ri ... _577wt_911

[bassmasta]

i still cant find it i can only find a 80 pin double row header, but thanks anyway neverused.

You can just chop it down. Just make sure the spacing is right (.1" and .08" are common). But keep in mind you will probably lose a few pins when you cut.

[N64BitModder]

I have been searching and found this:
http://www.pchcables.com/pinhe2502pir.htm
I think this should work, wouldn't it? cause i dont want to fully wire the system and i dont want to take a chance on cutting the 80 pin header.

[neverused]

This should be a good start... http://www.frys.com/search?search_type= ... .y=0&cat=0" onclick="window.open(this.href);return false;

[Cojiro]

Do it the old fashioned way, like a lot of people do, by Soldering 48 individual wires over and over again until you're 100% satisfied with the job

yeah, what he said. it's not as hard as you think.

[Basement_Modder]

Do it the old fashioned way, like a lot of people do, by Soldering 48 individual wires over and over again until you're 100% satisfied with the job

yeah, what he said. it's not as hard as you think.

Ditto.

RCP wiring isn't even that incredibly hard, just time consuming. Compared to that, standard relocating is a simple 20-minute job.

[N64BitModder]

unfortunately luke_hankins i do not have the time or the patience to wire 48 or so wires from the RCB to the cart

so i would have to use the mod moose jr. used

when ever i get my first job i am prob. going to start on my first portable in like 3 or 4 months

so right now i am preparing myself for this task cause i never tried anything like this

[metalcookie]

so right now i am preparing myself for this task cause i never tried anything like this

To get prepared for the N64, try digging up old electronics that stopped working, and see if you can fix them, even though you have no idea why they don't work. When messing around with the N64, you'll be doing a lot of that *grabs a hand full of TI regulators and throws them at the wall*

[N64BitModder]

Thanks metalcookie, can do that on some of my old computer boards that stopped working.