It needs to run on a somewhat low voltage. (3 VDC or approx.)
It must preform the task of outputting voltage on specific pins, based on weather other ones are grounded.
For example: Pin 1 is connected to GND, so pin 6 outputs voltage. Now pin 2 in connected to GND, so pin 7 outputs voltage. I need it for multiple connections, but using more than one IC is fine by me, but I prefer that at least 3 or 4+ pins are available for voltage output.
Anybody have any suggestions?
Need an IC to do something. Suggestions?
Moderator: Moderators
-
Basement_Modder
- Portablizer
- Posts: 962
- Joined: Sun Aug 24, 2008 7:16 am
- Location: Next door to my neighbor
- Contact:
Need an IC to do something. Suggestions?
Cheers,
Basement_Modder
_________________
Basement_Modder
_________________
-
Basement_Modder
- Portablizer
- Posts: 962
- Joined: Sun Aug 24, 2008 7:16 am
- Location: Next door to my neighbor
- Contact:
Re: Need an IC to do something. Suggestions?
Due to suggestions, I'm going with a logic hex inverter.
Cheers,
Basement_Modder
_________________
Basement_Modder
_________________