I have 3 of these http://www.batteryspace.com/highpowerpo ... 7arate.asp" onclick="window.open(this.href);return false; with a protection circuit. I can not figure out how to wire it up to triple the volts and make it charge. Can anyone tell me how I need to do this.
The circuit board is PCM-L104sb-026 Rev 1.0 and it has P+ P- B+ B- B1- B2- B3- and LED I am so confused. I want to use these in my N64p but can not figure this out.
Battery Help
Moderator: Moderators
-
Hifeno
- Portablizer Extraordinaire
- Posts: 666
- Joined: Sat Jul 19, 2008 4:12 pm
- Location: Seneca SC
- Contact:
Battery Help
That's Hacking Awsome
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
-
hailrazer
- Portablizer Extraordinaire
- Posts: 2764
- Joined: Mon Jul 10, 2006 8:57 pm
- Location: Georgia Sweet Georgia
Re: Battery Help
The batteries are wired in series. So you will have it like this top pic (add another battery of course):Hifeno wrote:I have 3 of these http://www.batteryspace.com/highpowerpo ... 7arate.asp" onclick="window.open(this.href);return false; with a protection circuit. I can not figure out how to wire it up to triple the volts and make it charge. Can anyone tell me how I need to do this.
The circuit board is PCM-L104sb-026 Rev 1.0 and it has P+ P- B+ B- B1- B2- B3- and LED I am so confused. I want to use these in my N64p but can not figure this out.
Then you will wire them to the Pcb in the same spots as this pic :
So you will be using the B+ , then B1, then B2, then B- . The B3 is not used.
My Portable Systems:
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
-
Hifeno
- Portablizer Extraordinaire
- Posts: 666
- Joined: Sat Jul 19, 2008 4:12 pm
- Location: Seneca SC
- Contact:
Re: Battery Help
P+ and P- goes to charge jack. What goes to screen/n64
That's Hacking Awsome
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Re: Battery Help
They also go to the screen/n64. "Charge load" means what the charge from the batteries will be going toHifeno wrote:P+ and P- goes to charge jack. What goes to screen/n64
(or, in the case of the charging jack, from)-
Hifeno
- Portablizer Extraordinaire
- Posts: 666
- Joined: Sat Jul 19, 2008 4:12 pm
- Location: Seneca SC
- Contact:
Re: Battery Help
Jiden what problem were you having with these?
That's Hacking Awsome
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Re: Battery Help
I think they were putting out a LOT less mAh, not enough to power the system or keep the screen running. I think so, anyway
-
Hifeno
- Portablizer Extraordinaire
- Posts: 666
- Joined: Sat Jul 19, 2008 4:12 pm
- Location: Seneca SC
- Contact:
Re: Battery Help
The problem I am having now is that that my batteries are only suppose to output 11.1 volts but when I hook multimeter to it they are outputting 14.7 volts is this okay for the n64? Why are they outputting so much voltage? I have it wired just like the diagram.
That's Hacking Awsome
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
-
Hifeno
- Portablizer Extraordinaire
- Posts: 666
- Joined: Sat Jul 19, 2008 4:12 pm
- Location: Seneca SC
- Contact:
Re: Battery Help
Any help guys.
That's Hacking Awsome
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Re: Battery Help
Hate to not really have any help...but I have no idea.
-
geno whirl
- Posts: 115
- Joined: Tue Jun 23, 2009 3:23 pm
- Location: About 40 miles from Nowhere
Re: Battery Help
I don't know why it is outputting so much voltage, but I can tell you that 14.7 volts is not okay to wire to the n64. you will fry it
argelfraster wrote:Designer noob wrote:umm, well that sucks. I was going to buy one for my next portable (After, my WIV) and then franklin case it.
Frankencase.