TS-64 Worklog / Questions

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

nobble
Posts: 170
Joined: Mon Nov 16, 2009 3:34 am
Location: Minnesota

Re: TS-64 Worklog / Questions

Post by nobble »

you are correct
smitty
Posts: 372
Joined: Thu Sep 24, 2009 3:45 pm
Location: the band room

Re: TS-64 Worklog / Questions

Post by smitty »

Ok, good. But I don't know how to solder yet so now I have to wait for my dad to get home so he can either teach me or do it himself. And, despite my precautionary question, it did almost blow up. And I didn't even wire up the batteries yet...

So let this be a warning to everybody else that's as ignorant as I am. Batteryspace.com batteries, at least to some extent, are precharged. So don't leave them lying near anything metal. I was putting things in the case to make sure it would all fit (and it did) but I left them in there, and the batteries were not insulated, because, as far as I knew, they weren't connected, and they weren't charged. But I was wrong, on both accounts. AND I HAZ BROUGHT SOME PICTUREZ!!!
burnt metal
burnt metal
HNI_0010.JPG (57.08 KiB) Viewed 5115 times
more burnt metal, melted plastic
more burnt metal, melted plastic
HNI_0011.JPG (59.35 KiB) Viewed 5115 times
singed circuitboard
singed circuitboard
HNI_0013.JPG (82.66 KiB) Viewed 5115 times
Mario wrote:Yes, I've gone to my local Wal-Mart and was amazed at their selection of resistors, inductors, and FPGA chips. :roll:
Image
Jidan
Posts: 171
Joined: Mon Nov 16, 2009 6:30 pm

Re: TS-64 Worklog / Questions

Post by Jidan »

Iiiiiiiiiiiiiiiiiiii don't think I would use that battery again. Yeah, they come pre charged because they don't have anything to wear the charge out :P

Oh, and in case it wasn't obvious - once you get your wires on there nice and tight, I would definitely cover the tabs with electrical tape
marshallh
Moderator
Posts: 2987
Joined: Sat Sep 10, 2005 2:17 pm
360 GamerTag: marshallh
Location: here and there
Contact:

Re: TS-64 Worklog / Questions

Post by marshallh »

Oh my god dude, you are a dumbass :facepalm:

ALL Li-ion and Li-poly cells are shipped with a charge, if they came shipped empty they would explode when you tried to charge them.

Let this be a lesson to everyone else: keep the cells in the bags until you're ready to use them.


:mrgreen:
Image
jdmlight
Posts: 795
Joined: Thu Dec 27, 2007 11:17 pm
Steam ID: jdmlight
Location: A boring suburb of Chicago.

Re: TS-64 Worklog / Questions

Post by jdmlight »

marshallh wrote:Oh my god dude, you are a dumbass :facepalm:

ALL Li-ion and Li-poly cells are shipped with a charge, if they came shipped empty they would explode when you tried to charge them.

Let this be a lesson to everyone else: keep the cells in the bags until you're ready to use them.


:mrgreen:
I thought all rechargeable batteries (not just Li-ion/li-poly) were shipped with at least some charge. My NiMh's certainly were.
--John (and please call me John, it's really weird to be called by my username)
Fight MS Paint abominations! If you don't have a camera, go here, and pick something 3 megapixels or higher.
marshallh
Moderator
Posts: 2987
Joined: Sat Sep 10, 2005 2:17 pm
360 GamerTag: marshallh
Location: here and there
Contact:

Re: TS-64 Worklog / Questions

Post by marshallh »

jdmlight wrote:
marshallh wrote:Oh my god dude, you are a dumbass :facepalm:

ALL Li-ion and Li-poly cells are shipped with a charge, if they came shipped empty they would explode when you tried to charge them.

Let this be a lesson to everyone else: keep the cells in the bags until you're ready to use them.


:mrgreen:
I thought all rechargeable batteries (not just Li-ion/li-poly) were shipped with at least some charge. My NiMh's certainly were.
Yup, and on the Li-poly cells from batteryspace, they even write the voltages the batteries were charged & tested to on the packaging.
Ni-Cd cells are the only type of cell you can really run down completely without hurting.
Image
smitty
Posts: 372
Joined: Thu Sep 24, 2009 3:45 pm
Location: the band room

Re: TS-64 Worklog / Questions

Post by smitty »

Well excuuuse me for being new at this Marshall. Sheesh.
Mario wrote:Yes, I've gone to my local Wal-Mart and was amazed at their selection of resistors, inductors, and FPGA chips. :roll:
Image
nobble
Posts: 170
Joined: Mon Nov 16, 2009 3:34 am
Location: Minnesota

Re: TS-64 Worklog / Questions

Post by nobble »

Poor smitty. It will be ok. Hey, At least you weren't hurt.
smitty
Posts: 372
Joined: Thu Sep 24, 2009 3:45 pm
Location: the band room

Re: TS-64 Worklog / Questions

Post by smitty »

Yeah, like I said, it only almost blew up. And, if it didn't discharge all the way, which I presume it didn't because the smell got continually worse until my dad home and told me it was something electronic, immediately leading me to my N64, which was warm... Would it still be safe to use? I don't have any money to buy another battery, and I'd really like to get this thing working soon...

And please, don't call me an idiot for suggesting using the battery that almost caught fire. I don't know anything about this.
Mario wrote:Yes, I've gone to my local Wal-Mart and was amazed at their selection of resistors, inductors, and FPGA chips. :roll:
Image
hailrazer
Portablizer Extraordinaire
Posts: 2764
Joined: Mon Jul 10, 2006 8:57 pm
Location: Georgia Sweet Georgia

Re: TS-64 Worklog / Questions

Post by hailrazer »

smitty wrote:Yeah, like I said, it only almost blew up. And, if it didn't discharge all the way, which I presume it didn't because the smell got continually worse until my dad home and told me it was something electronic, immediately leading me to my N64, which was warm... Would it still be safe to use? I don't have any money to buy another battery, and I'd really like to get this thing working soon...

And please, don't call me an idiot for suggesting using the battery that almost caught fire. I don't know anything about this.
I would "try" the battery. Maybe put it in a container and have an extinguisher handy. I have done that with a couple Li-Po's before and they were just fine. You just made a mini arc welder is all. LOL
My Portable Systems:
Image
-----Genimini---------Darth64---------Dreamtrooper--------Ncube---------Kamikazi64---N64Boy Advance
smitty
Posts: 372
Joined: Thu Sep 24, 2009 3:45 pm
Location: the band room

Re: TS-64 Worklog / Questions

Post by smitty »

cndowning wrote:
smitty wrote:Well excuuuse me for being new at this Marshall. Sheesh.
Hey man, we know you're new to this, but ya gotta take this stuff seriously. If you had left it like that, walked away and had something flammable near by, you might have lit your house up! Small chance sure, but still a chance. Just use caution as much as possible till you understand how electricity works a bit better. Just a friendly FYI. :) You're not an idiot, just take your time.
I know I messed up, and I knew that as soon as I figured out what happened. I didn't need Marshall and his ego to insult me to figure that out.
Mario wrote:Yes, I've gone to my local Wal-Mart and was amazed at their selection of resistors, inductors, and FPGA chips. :roll:
Image
thewise1
Portablizer Extraordinaire
Posts: 1413
Joined: Sun Jan 04, 2009 8:18 pm
Location: Sitting on my pile of authentic minnesota dirt

Re: TS-64 Worklog / Questions

Post by thewise1 »

I don't think he's getting a kick out of putting you down. It was just dumb to not do any research on what you're working with.


Batteries are BOMBS! If you mistreat these things they will catch fire or explode. And you must take proper safety precautions, like not leaving them out when you're not working on the.
ImageImageImageImageImageImage
smitty
Posts: 372
Joined: Thu Sep 24, 2009 3:45 pm
Location: the band room

Re: TS-64 Worklog / Questions

Post by smitty »

Well, he could've said that if it's what he meant. :wtf: And I didn't really plan on leaving it out for long, I was waiting for my dad to get home, but he wasn't back for like 4 hours. So that was dumb of me, he was taking my brother to the ER, and I think the last time he went there he wasn't back 'till 3AM...
Anyway, that was the past now, and I've learned. So I would appreciate it if the lectures could stop. :)
Mario wrote:Yes, I've gone to my local Wal-Mart and was amazed at their selection of resistors, inductors, and FPGA chips. :roll:
Image
MigueLLLLL
Posts: 197
Joined: Sun Mar 14, 2010 4:34 pm
PSN Username: migueIII
Location: my basement workshop!

Re: TS-64 Worklog / Questions

Post by MigueLLLLL »

smitty wrote:Well, he could've said that if it's what he meant. :wtf: And I didn't really plan on leaving it out for long, I was waiting for my dad to get home, but he wasn't back for like 4 hours. So that was dumb of me, he was taking my brother to the ER, and I think the last time he went there he wasn't back 'till 3AM...
Anyway, that was the past now, and I've learned. So I would appreciate it if the lectures could stop. :)
agreed :P
work log: http://forums.benheck.com/viewtopic.php?f=5&t=36959" onclick="window.open(this.href);return false;
Talakoski wrote: Where did you get those copper things over the Heat Sinks?
samjc3 wrote:just for the record, those "copper things over the heatsinks" are the heatsinks. :wink:
Post Reply