xBook Worklog (Now Powered via PicoPSU!!)

Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)

Moderator: Moderators

Post Reply
hackmodford
Portablizer Extraordinaire
Posts: 651
Joined: Fri Aug 21, 2009 10:44 am
Location: Michigan
Contact:

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by hackmodford »

Okay I did some detailed testing with the ol' multimeter 8)
Here's my findings...

PicoPSU Standby .04A
Monitor Standby .03A
================================
Just Xbox no monitor
================================
Xbox "2.5" HDD" + DVD 4.37-3.6 (2.5 at one point) A
Xbox 2.5" HDD 3.5A
Xbox DVD 3.3-4A
=====================================
Just monitor 2A
=====================================
Everything monitor xbox all drives etc.
=====================================
5A just in dashboard (normal operation)
5.3A when watching a m4v movie on HDD
6A when playing music and using visualizers
Viewing Pictures 4.8A
Game (HDD and DVD) 6.5A (DVD might have been slightly more but hard to tell)
hackmodford
Portablizer Extraordinaire
Posts: 651
Joined: Fri Aug 21, 2009 10:44 am
Location: Michigan
Contact:

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by hackmodford »

http://www3.towerhobbies.com/cgi-bin/WT ... LXUF47&P=8" onclick="window.open(this.href);return false;

Something like that ought to power it fine.
Ill probably buy this last at this point since I can power the xbox. I'm just scared to play with it for too long.
Biased
Posts: 439
Joined: Mon Feb 16, 2009 6:29 pm
Location: Perham, Minnesota

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by Biased »

Quick, get this beast done before April 15th so you can play in the farewell party for Halo 2!
Harlequin
Posts: 182
Joined: Fri Apr 25, 2008 1:20 am

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by Harlequin »

Toshiba 60 GB 8mm 1.8" Embedded Microdrive Hard Drive - MK6006GAH

Electrical Voltage
3.3V at 5%
Power Consumption
Start 1.2W typ
Seek 1.4W typ
Read/Write 1.4W typ
Sleep 0.08W typ
Energy Consumption Efficiency 0.005W/GB avg

by my calculations the Seek/Read/Write (which would draw the most Amp) is around 0.5 amps, maybe a little under.. If that stays true then your numbers would be:

Xbox "1.8" HDD" + DVD 3.8-4.5 A on the top end.. this doesn't seem to ring true though since it was quite a bit less than that when combining your 2.5 and DVD
Xbox 1.8" HDD 0.5A
Xbox DVD 3.3-4A

The way I see it, you could be cutting 2 or more amps by switching out to one of the more common zif drives (60gig ipod classic)
nevermind1534
Senior Member
Posts: 1977
Joined: Fri Feb 06, 2009 1:36 pm
Steam ID: nevermind1534
Location: Detroit, MI
Contact:

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by nevermind1534 »

If you're doing that, you might as well just use CF cards. I'm not sure about their lifespan, though.
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"
Harlequin
Posts: 182
Joined: Fri Apr 25, 2008 1:20 am

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by Harlequin »

the xbox doesn't like working with compact flash. The seek/read/write time is way off for some reason. The boys at the scene have discussed this quite a bit..

The smallest HDD that was found to work was the 1.8 HDD ripped from a zune. iPods use the same drives so I would imagine it would be all good.
hackmodford
Portablizer Extraordinaire
Posts: 651
Joined: Fri Aug 21, 2009 10:44 am
Location: Michigan
Contact:

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by hackmodford »

Hey guys I've got a weird problem now...

I seperated the xbox and monitor since I don't think the PS can handle it all. (remember the fuzzy screen)

Okay so now they're running seperatley and the picture is worse :shock: Very worse.

If I use composite it's bearable but worse than it was before. There's two fuzzy barish areas.
If I use comonent it's horrible and my screen can't barely even recognize it as a video signal.
The two barish areas are like completely distorted.

What could cause this? :cry:
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by vskid »

Try hooking up another ground between the screen and the xbox. Also, I have a DVD player screen that looked like crap after I removed it from the rest of the player, had symptoms similar to yours. I checked the composite line in the DVD player and found a capacitor on it. I desoldered it and added it to the line going to the screen, looked a ton better. I haven't been able to find much about it, but I think putting a 220uF cap on all the video lines, positive towards the signal source, might fix your problem if it isn't a grounding issue.
Image
Harlequin
Posts: 182
Joined: Fri Apr 25, 2008 1:20 am

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by Harlequin »

You should probably try to connect it via VGA as well. It's probably the best that you can get out of the original xbox without hacking up a VGA -> DVI -> HDMI adapter (which probably wouldn't even work).

I'm still holding out that you take the plunge on a 1.8 HDD and see if it can all run on the one PSU line.
hackmodford
Portablizer Extraordinaire
Posts: 651
Joined: Fri Aug 21, 2009 10:44 am
Location: Michigan
Contact:

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by hackmodford »

When I get time I'm going to try the extra ground idea. (and test it with composite, if I get results there it should happen everywhere else right?)
hackmodford
Portablizer Extraordinaire
Posts: 651
Joined: Fri Aug 21, 2009 10:44 am
Location: Michigan
Contact:

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by hackmodford »

Adding a second ground wire got the picture "almost" back to normal!
Adding a third kinda helped but not much.
What is wrong? What should I do?
mako321
Posts: 711
Joined: Mon Aug 10, 2009 6:27 am

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by mako321 »

add more grounding wires to different grounds 8)
hackmodford
Portablizer Extraordinaire
Posts: 651
Joined: Fri Aug 21, 2009 10:44 am
Location: Michigan
Contact:

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by hackmodford »

Seriously?
Is there some kind of scientific explanation?
kibble
Posts: 439
Joined: Wed Jul 29, 2009 10:41 am

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by kibble »

Maybe electrical explanations. Are your video wires shielded with something that's grounded?
Coming Soon: Kibble's L'Ectroshop (parts and stuff FS)
hackmodford
Portablizer Extraordinaire
Posts: 651
Joined: Fri Aug 21, 2009 10:44 am
Location: Michigan
Contact:

Re: xBook Worklog (Now Powered via PicoPSU!!)

Post by hackmodford »

I would assume so since I'm using a store bought (ebay bought) cable at the moment. I haven't "hardwired" the video connection yet and probably never will (why should I :mrgreen: )

So I don't think that is the problem.
Post Reply