Z and L switch

[Jfish]

Dose anyone know how to hook up the Z and L toggle switch

[Cojiro]

the negative coming from the pushbutton can be grounded to the negative of the Z, L, or any common ground on the controller circuit board

[ToastBucket]

http://img159.yfrog.com/i/tactswitchtoggles.png/" onclick="window.open(this.href);return false;

This probably isn't necessary but it's what I would do because (I might be wrong here) the button needs to have a complete circuit to work. When the button is pressed it completes a circuit so it would keep the loop going.

[kibble]

It only needs to be grounded on one side, all the button inputs receive the same ground. No need to ground it at the point of each button used.

[Kyo]

You would be right if there was such a thing as L- and Z-, but this is both just the normal ground, so no. The diagram in the first reply is all you need.

[Jfish]

Thankes for the information guys