how can i adjust the volume on my headphone jack on my 360p?

[minnieman]

just as the title says... i got a headphone jack but no way to adjust the volume... any ideas

[bicostp]

Headphones with an inline volume control are the easiest solution.

Put a stereo potentiometer between the audio source and headphone jack.

[minnieman]

thanks you so much! exactly what i needed

[minnieman]

http://www.radioshack.com/product/index ... Id=2062359" onclick="window.open(this.href);return false;

woud this work?

[bicostp]

It's the kind of component you need, but I'm not sure if 100k is too much resistance or not.

This one could work too.
http://www.radioshack.com/product/index ... Id=3064080" onclick="window.open(this.href);return false;

[minnieman]

how would i wire the 10k one?

[bicostp]

One of the comments has the pinout, and Rat Shack usually prints a diagram on the package.

Place it with the pins pointing down and the 5-pin edge facing toward you. From left to right, the pins are:

1) Common (GND for audio use)
2) R1 Wiper (Out 1 for audio)
3) R2 Wiper (Out 2 for audio)
4) R2 End (In 2 for audio)
5) R1 End (In 1 for audio)