Ignore the button holes on the right.
Sneak Peek...
Moderator: Moderators
-
andrewdorsey
- Posts: 183
- Joined: Mon Dec 01, 2008 2:49 pm
- Location: hmmmmmmm
Sneak Peek...
Something I have been working on for a while now...
Ignore the button holes on the right.
Ignore the button holes on the right.
Last edited by andrewdorsey on Wed Jan 27, 2010 9:26 pm, edited 3 times in total.
Re: Sneak Peek...
Nice!!!!!!!!!! Jk, the image is not showing up.andrewdorsey wrote:Something I have been working on for a while now...
Ignore the button holes on the right.
overlordlink wrote:alright well i was kinda deabating whether or not to finish my SnesP, Or to slightly romance something that existed to met my needs but it appears as if im gonna stick with the SnesP. At least for now lol
-
andrewdorsey
- Posts: 183
- Joined: Mon Dec 01, 2008 2:49 pm
- Location: hmmmmmmm
Re: Sneak Peek...
Fixed the image. This is a crappy cell phone picture by the way.
-
argelfraster
- Posts: 984
- Joined: Sun Sep 07, 2008 3:14 pm
- Contact:
-
andrewdorsey
- Posts: 183
- Joined: Mon Dec 01, 2008 2:49 pm
- Location: hmmmmmmm
Re: Sneak Peek...
Here are some moer detaled pics...
Notice the image quality sucks because the only camera that works right now in my house is me cell phone camera.
I don't have my batteries yet, so for now the system runs off of wall power.
Don't feel like doing an RCP wiring, so I will build plastic over this. Still have to wire the cartridge slot by the way
Thickness.
Back. the holes are for the fan.
Size compared to an n64 cart.
Size compared to a psp.
The whole system measures 6" wide, 4 2/16 inches tall, and 1 3/4 inches thick. 2 2/16 inches with the little ridge on the back.
The system will have a 3.5" screen
3000mah 7.2V Batteries
Dual joysticks (C Stick and regular Joystick)
and more.
By the way, might as well tell you guys now.
I SUCK at casework, so I will try the best I can but don't get your hopes up too much.
I hope to get this done, but it seems that everything I touch dies in the making.
Notice the image quality sucks because the only camera that works right now in my house is me cell phone camera.
I don't have my batteries yet, so for now the system runs off of wall power.
Don't feel like doing an RCP wiring, so I will build plastic over this. Still have to wire the cartridge slot by the way
Thickness.
Back. the holes are for the fan.
Size compared to an n64 cart.
Size compared to a psp.
The whole system measures 6" wide, 4 2/16 inches tall, and 1 3/4 inches thick. 2 2/16 inches with the little ridge on the back.
The system will have a 3.5" screen
3000mah 7.2V Batteries
Dual joysticks (C Stick and regular Joystick)
and more.
By the way, might as well tell you guys now.
I SUCK at casework, so I will try the best I can but don't get your hopes up too much.
I hope to get this done, but it seems that everything I touch dies in the making.
Last edited by andrewdorsey on Thu Jan 28, 2010 6:01 pm, edited 1 time in total.
-
argelfraster
- Posts: 984
- Joined: Sun Sep 07, 2008 3:14 pm
- Contact:
Re: Sneak Peek...
How are you going to fit 3000 batteries in there?andrewdorsey wrote: 3000 7.2V Batteries.
On a serious note, you're gonna want batteries with a higher capacity, at least 4000.
-
andrewdorsey
- Posts: 183
- Joined: Mon Dec 01, 2008 2:49 pm
- Location: hmmmmmmm
Re: Sneak Peek...
Haha. You know what I meant. 3000mah batteries. I would love a higher capacity battery. For now, I will buy the 3000mah batteries, and then if I have more room in the case, then I will buy another set of batteries and wire them in parallel to get 6000mah. 