Intec PS2 controller with screen

ShaolinDrunkard · Post by **ShaolinDrunkard** » Mon Apr 18, 2005 4:18 pm

In most of the posts on this forum people are either looking for or using the hipgear screens. But if your looking for a similar product, dont count out the Intec version. You can find these a lot easier than the hipscreens in online stores and on ebay. I just found a few of them at ToysRus for 17.99 each. As far as i know the two are are similar products. The screens seem perfectly clear and the sound from the speakers is pretty good. And they are very easy to "hack" for a portable. I dont know if its just the ToysRus near my house or what but they seem to still carry a ton of intec stuff, so I think thats a good place to look.

Dave · Post by **Dave** » Mon Apr 18, 2005 4:54 pm

How big are the screens? And have you hacked one personally?

maddox · Post by **maddox** » Mon Apr 18, 2005 6:18 pm

here is the Intec website >> C L I C K

jus click to the retailers list

Dark Savant0 · Post by **Dark Savant0** » Mon Apr 18, 2005 6:31 pm

I just bought one on ebay. We'll see how similar these piece's of crap are.

40 shipped

. Perhaps I shouldve went to TRU.

Hope I can use this for my NPES V2. V1 was the french dudes one.

ShaolinDrunkard · Post by **ShaolinDrunkard** » Tue Apr 19, 2005 10:09 am

They are 2.5" just like the hipscreens and by the way Dark Savant0 they really arent pieces of crap. I posted a this a few days ago under "hipscreen hookup explaination" but i was wrong, its actually for the intec screens. This is the simplest explaination i can give to hack one.
If you dont want to hookup regular rca wires you can just as easily solder
each wire to the respective pins on the board you are using. In my case i soldered(sorry if i spell it wrong) the video and audio wires to the pins underneath the regular outputs on my megajoy, that way you can still use the output to play the nesp on t.v.

The wires are as follows:
Orange:+12v
Black:Ground
White:Left Audio
Red:Right Audio
Brown:AG?
Yellow:Video

After you remove it from the controller, cut the wires coming from the
plug in the lcd. You can cut a regular rca video/audio wire for each of the video and audio hookups. You may have noticed that rca cables have an inner and outer wire. For the video just hook up the middle wire, for the audio use the middle wire to hook up to the red and white hipscreen wires, and (the following is key) or the video will be scrambled, HOOK THE BROWN AG WIRE TO THE OUTER WIRE OF ONE OF THE AUDIO CABLES. I have no idea what this wire is or does, all i know is thats how it works.

maddox · Post by **maddox** » Tue Apr 19, 2005 10:27 am

any idea where to buy in europe ? especially in germany ?

ShaolinDrunkard · Post by **ShaolinDrunkard** » Tue Apr 19, 2005 3:29 pm

Not really, sorry. Does germany have an ebay?

Post by **gannon** » Tue Apr 19, 2005 3:37 pm

yeah, ebay.de

maddox · Post by **maddox** » Wed Apr 20, 2005 5:06 am

ShaolinDrunkard wrote:Not really, sorry. Does germany have an ebay?

of cause we have an ebay
it's germany and not the place behind the moon

Dark Savant0 · Post by **Dark Savant0** » Wed Apr 20, 2005 1:39 pm

Did you detect my sarcasm? I was just kidding about the piece of crap.

Is that guide for a megajoy, or a reg nintendo, cause I am using the nintendo here.

It gets 12 v? Would it work with the schematics on nestable?

ShaolinDrunkard · Post by **ShaolinDrunkard** » Mon Apr 25, 2005 7:44 pm

Its for anything, i have one of my screens hooked up to a dvd player.
You can hook it up to anything.

Post by **Triton** » Mon Apr 25, 2005 8:46 pm

could you get me one of those? for less than 20$ that aint bad only thing i can get for 20$ is a 4 inch interact clamshell psone lcd whick are mediocre at best, i would pay what you paid plus S&H mebe

ShaolinDrunkard · Post by **ShaolinDrunkard** » Tue Apr 26, 2005 2:12 pm

Ill check my local toyrus for you but i dont know if they have any left at that price, but if you type in "controller screen" on ebay theres two for sale fo 30$ each NIB and a hipgear screen for 36$ NIB.

Dark Savant0 · Post by **Dark Savant0** » Fri Apr 29, 2005 7:21 pm

I bought one. The pinouts are the exact same ones as you posted, SDrunkerd. I recommend to everyone that they remove the screws on the lcd, if you still want to use the control. The wires are hotglued onto it.

Post by **bicostp** » Fri Apr 29, 2005 7:26 pm

I already got one for my PSoneP, but I'm going to get another one because I like the one I have and I want to be able to have multiplayer games without a TV. (Probably gonna modify it with standard AV inputs.)

Can it be successfully run on less than 12 volts? The PSone only uses 7.5-ish, and I don't want to use too many batteries.