N64p LOG

[Alderion]

Hey Im starting my first n64p and I wanted to cross check my list of stuff
So here it is:
N64(have)
Screen 3.5"(soon to be ordered)
Battery(dont have)
Controller(have)
PTH08000((have)
Case ZN45(soon to be ordered)
2.2kohm resistor(dont have)
100uf electrolytic capacitor(dont Have)
Soldering iron(have)
Desoldering pump or braid(soon to be ordered)
btw im in australia

Other questions:
Can i use this battery: http://cgi.ebay.com.au/Lipo-Battery-7-4 ... 439abd4691" onclick="window.open(this.href);return false;


Can i use this instead of bondo
http://www.biasboating.com.au/p-805-kh- ... 450gm.aspx" onclick="window.open(this.href);return false;

[argelfraster]

I'm not sure about that filler.
About the battery; did you notice that its for pick up only?

[Alderion]

No, the pickup is cash only, he posts aswell.
But i can pickup cos i live close

[blaze3927]

if your in aus use selleys multipurpose knead it

[Alderion]

What pcb will i need (i dont want to buy from batteryspace because postage to me is $80) and which charger
@blaze ill check selleys out at bunnings or kmart

[Jidan]

I'm sorry - I'm not trying to hijack your thread, but is it a 2k or a 2.2k resistor that you need to get 3.3v?

[snowpenguin]

For the pth08000, both have gotten us voltages that are good enough. To get 3.3v, you're actually supposed to use a 1.87k resistor, which is extremely uncommon so many just use 2k.

[Alderion]

I need to know what pcb and charger
PLEASE

[Alderion]

Sorry bout double post but
can i use these resisters:
http://cgi.ebay.com.au/100-x-Resistors- ... 1462wt_939" onclick="window.open(this.href);return false;

or do i need 1/4W resistor

[snowpenguin]

The specifications for the TI card actually specify a 1/20 watt resistor but as long as the wattage is over that you're fine.

The wattage of the resistor is how much power it can handle at once, and if it can handle 1/2W then the <1/20W that is going through it will be fine.

[Alderion]

Sorry for the noobish question but im having a mental blank. I used to do this heaps but how woule i wire this switch for the battery:
http://www.jaycar.com.au/ShowLargephoto ... ch&IMAGE=2