rumble pak question

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
Cojiro
Posts: 212
Joined: Sun Jul 12, 2009 1:06 pm
Location: Texas
Contact:

rumble pak question

Post by Cojiro »

the rumble pak that i have takes two AA batteries. if i ran this off my 3.3v line instead, how big of an effect would it have on the life of my system?
My Mods:
Image Image Image Image
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Re: rumble pak question

Post by timmeh87 »

Negligible

Running a motor from the CPU power rail might make things go a bit screwy though...
Image

"Linux is only free if your time is worthless"
argelfraster
Posts: 984
Joined: Sun Sep 07, 2008 3:14 pm
Contact:

Re: rumble pak question

Post by argelfraster »

2 AA's = around 5v
smitty
Posts: 372
Joined: Thu Sep 24, 2009 3:45 pm
Location: the band room

Re: rumble pak question

Post by smitty »

argelfraster wrote:2 AA's = around 5v
But a AA is 1.5v, how does 1.5 * 2 become 5?
Mario wrote:Yes, I've gone to my local Wal-Mart and was amazed at their selection of resistors, inductors, and FPGA chips. :roll:
Image
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Re: rumble pak question

Post by timmeh87 »

:facepalm:
Image

"Linux is only free if your time is worthless"
argelfraster
Posts: 984
Joined: Sun Sep 07, 2008 3:14 pm
Contact:

Re: rumble pak question

Post by argelfraster »

:facepalm: Oh yeah
Don't know what I was thinking about...
Cojiro
Posts: 212
Joined: Sun Jul 12, 2009 1:06 pm
Location: Texas
Contact:

Re: rumble pak question

Post by Cojiro »

So do you think it would be worth a try?
My Mods:
Image Image Image Image
smitty
Posts: 372
Joined: Thu Sep 24, 2009 3:45 pm
Location: the band room

Re: rumble pak question

Post by smitty »

You might as well try, some 3rd party rumble packs didn't need batteries, so it has to be possible.
Mario wrote:Yes, I've gone to my local Wal-Mart and was amazed at their selection of resistors, inductors, and FPGA chips. :roll:
Image
Zeturi
Posts: 224
Joined: Sun Oct 26, 2008 9:07 pm
PSN Username: Zeturi_
Location: California

Re: rumble pak question

Post by Zeturi »

If what Smitty says is true, then you should be fine. You could just tie the voltage and ground lines together with what the controller uses.
If you're getting 404'd when trying to use the links in stickies, try this tutorial to find that juicy info.
smitty
Posts: 372
Joined: Thu Sep 24, 2009 3:45 pm
Location: the band room

Re: rumble pak question

Post by smitty »

Zeturi wrote:If what Smitty says is true, then you should be fine. You could just tie the voltage and ground lines together with what the controller uses.
I'm not sure if those packs used the whole 3 volts that a regular one does. But it's still worth a try.
Mario wrote:Yes, I've gone to my local Wal-Mart and was amazed at their selection of resistors, inductors, and FPGA chips. :roll:
Image
MarioOwnsAll
Posts: 228
Joined: Wed Mar 11, 2009 9:49 am

Re: rumble pak question

Post by MarioOwnsAll »

I'm sure you could run it just fine off the 3.3v line but I dont recommend rumble packs in portables.
Post Reply